The AirTAC GFR200C06MC2WT AirTAC Filter Regulator NPT1/8, 5 um is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200C06MC2WT is a filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in a single body. This size 200 unit carries a 1/8 in NPT port, a fine 5 um filter element (the W grade, against the 40 um standard), a manual drain on the bowl, and a round pressure gauge reading in psi. The standard regulator covers 0.05-0.9 MPa (7-130 psi) with the manual-drain arrangement, maximum inlet pressure is 1.0 MPa (145 psi), and the operating temperature range is -5 to 70 C (non-freezing). The polycarbonate bowl is fitted with an included mounting bracket; no reverse/check valve is fitted in this configuration.
This is a genuine AirTAC part from the GFR filter-regulator family, which spans sizes 200, 300, 400 and 600 with port sizes from 1/8 in up to 1 in, and options for drain type, filter grade, gauge style and scale, G/NPT threads and check valve. Flow for these units is published as curves rather than a single rated figure, so we confirm the datasheet and sizing figures for your application on request.
| Model | GFR200C06MC2WT AirTAC Filter Regulator NPT1/8, 5 um |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
A compact filter regulator feeding the directional valves and cylinder circuits of a carton-sealing or wrapping machine, where the 5 um element protects pilot valves and the round psi gauge gives the operator a clear setpoint readout.
Point-of-use air preparation for paint or coating spray guns, where the fine 5 um filtration keeps particulate and condensed water out of the finish and the regulator holds a steady, repeatable atomising pressure.
Filtration and pressure regulation for the compact cylinders and grippers of a benchtop pick-and-place module, with the 1/8 in NPT port matching the tight manifold connections typical of small cells.
Choose the size and port step against the air consumption of the circuit: this unit is size 200 with a 1/8 in NPT port, the smallest step in the GFR range, so step up to GFR300/400/600 if the line demand is higher. Drain type is a real choice: manual drain (this unit) needs someone to open the drain, while automatic and differential-pressure drains discharge condensate without attention. Filter grade is 40 um standard or 5 um fine (this unit, code W) where downstream valves and instruments need cleaner air. Gauge style is embedded square (standard) or external round (this unit, psi scale; MPa and bar scales are also available). Thread is PT as standard with G and NPT as order options, and a mounting bracket is included here. Because flow is published as curves and not as a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as characteristic curves rather than a single rated figure, so there is no one rated flow number we can quote. Send us your line pressure and air demand and we will confirm the sizing from the datasheet on request.
The M in the code specifies a manual drain: condensate collected in the bowl is released by hand. The GFR family also offers automatic and differential-pressure drains that discharge condensate without attention; with a manual drain the regulator range is 0.05-0.9 MPa (7-130 psi).
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.