The AirTAC GFR200C06MC3TK AirTAC Filter Regulator NPT1/8 is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200C06MC3TK is a size-200 filter regulator: it removes water and particulate from compressed air and sets downstream pressure in one compact body. This configuration is threaded 1/8 in NPT, carries a 40 um standard filter element, and drains by hand via the manual drain - you open it as part of a maintenance routine rather than relying on an automatic mechanism. The fitted check valve (code K) holds downstream pressure if the upstream supply is lost, the round external gauge reads in bar, and the mounting bracket is included.
This is a genuine AirTAC part. The GFR family runs from size 200 up to 600 with larger ports and flow, and is ordered with a choice of drain type, 40 um or 5 um filtration, gauge style and scale, PT, G or NPT thread, and bracket or no bracket. Flow is published as curves rather than a single rated figure, so ask us and we will confirm the datasheet figures for your application on request.
| Model | GFR200C06MC3TK AirTAC Filter Regulator NPT1/8 |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
On a CNC fixture line, this unit filters condensed water and chips-borne particulate out of the shop air and holds a steady clamping pressure for the pneumatic swing clamps; the check valve keeps the fixtures clamped if the main supply drops.
Feeding the small bore cylinders that push, divert and stop cartons on a packaging conveyor, the 1/8 in port suits compact drop lines while the regulator keeps actuation speeds consistent shift after shift.
For lab automation benches running pneumatic grippers and sample-handling actuators, the 40 um element protects the valves from dirt and moisture, and the bar gauge gives operators a clear local pressure reading.
Size 200 with a 1/8 in port is the compact entry step of the GFR range; if your line draws more air, step up to size 300, 400 or 600 for larger ports and higher flow capacity. Because this unit has a manual drain, its regulator setting range is 0.05-0.9 MPa (7-130 psi); if you would rather not drain by hand, the same family is available with automatic or differential-pressure drain. Filtration is 40 um as coded here, with a 5 um element (code W) available when downstream equipment needs finer air. The round gauge reads in bar; square embedded gauges and MPa or psi scales are alternatives. Thread is NPT here, with PT and G offered as order options, and the bracket is included.
One honest note before you order: filter-regulator flow is published as curves, not a single rated number, so we cannot quote a rated flow figure. Send us your application details and we will confirm sizing against the datasheet curves on request.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as performance curves rather than a single rated figure, so we do not quote a rated flow number. Tell us your line pressure and the air demand of your equipment, and we will confirm the flow figures from the datasheet on request before you order.
The M in the code means the bowl drains by hand: an operator opens the drain as part of routine maintenance instead of relying on an automatic mechanism. With a manual drain, the regulator setting range is 0.05-0.9 MPa (7-130 psi). If you prefer not to drain manually, the GFR family is also available with automatic or differential-pressure drain.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.