The AirTAC GFR200C06MC3WT AirTAC Filter Regulator NPT1/8, 5 um is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR200C06MC3WT is an AirTAC GFR-series filter regulator: one body that removes water and particulate from compressed air and holds downstream pressure at your setpoint. This size-200 unit is threaded NPT1/8, carries the finer 5 um filter element, a manual drain for hand-bleeding the polycarbonate bowl, and a round pressure gauge reading in bar. The standard-type regulator adjusts from 0.05-0.9 MPa (7-130 psi); maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C (non-freezing). A mounting bracket is included.
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with ports from 1/8 to 1 inch, and can be ordered with PT or G threads, 40 um or 5 um elements, manual, automatic or differential-pressure drains, and square or round gauges in MPa, psi or bar scales. Rated flow is published as curves rather than a single figure, so ask us to confirm the datasheet numbers for your application.
| Model | GFR200C06MC3WT AirTAC Filter Regulator NPT1/8, 5 um |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Supplies a small punch or stamping press with air stripped of water and swarf and held at the set pressure the press cylinders were set up for, protecting downstream valves on a supervised cell.
Feeds clean, regulated air to the pick, clamp and seal cylinders on a packaging conveyor, with the manual drain bled at shift start and end by the line operator.
Gives a bench-top test rig a fine 5 um air supply and an easily read bar gauge, so technicians dial in and verify test pressures by hand before each run.
Choose the size and port against the air your line actually consumes: this unit is size 200 with a 1/8 in NPT port, the smallest step in the GFR range, so move up to 300, 400 or 600 if your demand is heavier. Drain type is a real decision: manual (this unit) means periodic hand-bleeding and suits attended installations, while automatic and differential-pressure drains suit unattended runs. Filter grade is 40 um standard or 5 um (this unit, code W) where finer protection matters, and gauge scale is selectable in MPa, psi or bar - this unit carries a round gauge reading in bar.
Thread is PT as standard with G and NPT as order options (this unit is NPT), and a mounting bracket is included. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves, not as a single rated figure, so we do not quote a number here. Tell us your application and operating pressure and we will confirm the flow figures from the datasheet for you before you order.
The M in the code means the bowl is drained by hand: an operator opens the drain to bleed off collected water, which suits attended installations on a regular schedule. If the unit will run unattended, the same GFR series is available with automatic or differential-pressure drains instead.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.