The AirTAC GFR200C06MF1T AirTAC Filter Regulator NPT1/8 is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200C06MF1T is a size 200 filter regulator that removes water and particulate from compressed air and regulates downstream pressure in a single body. This configuration has a 1/8 in NPT port, a 40 um standard filter element, a manual drain on the bowl, and an embedded square pressure gauge scaled in MPa. Maximum inlet pressure is 1.0 MPa (145 psi), the standard regulator adjusts from 0.05 to 0.9 MPa (7-130 psi), and the operating temperature range is -5 to 70 C (non-freezing). The polycarbonate bowl on this size keeps the condensate and element visible for inspection.
This is a genuine AirTAC part. The GFR family is available in sizes 200, 300, 400 and 600 with port sizes from 1/8 in to 1 in, a choice of PT, G or NPT thread, manual or automatic drain, a 5 um optional element (code W), gauge scale options, and a low-pressure regulator type. Flow figures for this series are published as curves rather than a single rating, so ask us to confirm the datasheet figures for your application.
| Model | GFR200C06MF1T AirTAC Filter Regulator NPT1/8 |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Feeds and regulates the air to clamp cylinders on a milling or drilling fixture, where clean, dry air at a set pressure holds the workpiece consistently through the cycle.
Conditions the supply to one station of a cartoning or wrapping machine, protecting downstream valves and actuators from water and debris while holding a stable set pressure.
Regulates and filters the air feeding gripper valves on a small robotic pick-and-place cell, where a compact 1/8 in port unit suits the limited panel space.
Start with the port and size step: this unit is size 200 with a 1/8 in NPT port, and the GFR range steps up through sizes 300, 400 and 600 as your required flow grows. Because flow is published as curves rather than a single rated figure, ask us to confirm sizing against your application before ordering. Then choose the drain: manual (as fitted here, which also widens the regulation range to 0.05-0.9 MPa), automatic, or the differential-pressure default. The filter element is 40 um standard; specify code W for 5 um where finer filtration is needed. The square gauge on this unit is scaled in MPa, with psi and bar scales and an external round gauge available as options. PT is the standard thread; G and NPT are catalogue options to order, and this unit carries the NPT option. A mounting bracket is included.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves, not as a single rated number, so we do not quote a figure here. Contact us and we will confirm the flow data from the datasheet against your application before you order.
The M in the code specifies a manual drain: condensate is emptied by hand from the bowl, which suits intermittent-duty installations. The GFR family also offers an automatic drain (code A) and a differential-pressure drain (the default, blank) if you prefer unattended drainage.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.