The AirTAC GFR200C06MF2GK AirTAC Filter Regulator G1/8 Manual Drain is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR series combines water and particulate filtration with pressure regulation in a single body. This GFR200C06MF2GK is the size 200 unit with a G1/8 (BSPP) port, a 40 um filter element, a manual drain, an embedded square gauge reading in psi, and a built-in reverse (check) valve that blocks backflow from the downstream side. It regulates from 0.05 to 0.9 MPa (7-130 psi) with a maximum inlet pressure of 1.0 MPa (145 psi), operates from -5 to 70 C (non-freezing) on compressed air, and includes a mounting bracket. The size 200 bowl is polycarbonate (PC).
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with ports from 1/8 to 1 inch, and can be ordered with 5 um filtration (code W), automatic or differential-pressure drains, G or NPT threads, alternative gauge scales, or a low-pressure regulator type. Flow for this series is published as curves rather than a single rating, so ask us to confirm the datasheet and sizing for your application.
| Model | GFR200C06MF2GK AirTAC Filter Regulator G1/8 Manual Drain |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Mounted ahead of a packaging machine's valve manifold, the unit removes water and particles from shop air and holds the set pressure so the machine's solenoid valves and cylinders cycle consistently. The manual drain lets maintenance staff bleed the bowl during scheduled checks.
On a bottling or carton-handling line, this unit feeds diverting gates and stop cylinders: the 40 um element keeps grit away from the seals, the check valve holds the setting against downstream backflow, and the psi gauge lets operators read the set point at a glance.
On a laboratory test bench fed from a shop compressor, the regulator lets a technician dial the test pressure anywhere between 0.05 and 0.9 MPa, while the manual drain makes it simple to empty accumulated water from the bowl after each session.
The real choices in this family are the size and port (200/300/400/600, 1/8 to 1 inch), the drain type (manual, automatic or differential-pressure), the filter grade (40 um standard, 5 um with code W), the gauge (embedded square as standard, external round optional, in MPa, psi or bar scales) and the thread (PT standard; G and NPT as order options). This unit is the size 200, G1/8, manual-drain, 40 um configuration with a square psi gauge, a check valve and a bracket included. Because AirTAC publishes flow as curves and not as a single rated figure, send us your flow and pressure requirements and we will confirm the right size against the datasheet before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for this series as curves rather than a single rated figure, so we do not quote a number here. Send us your required flow and working pressure and we will confirm the sizing from the datasheet on request.
M specifies a manual drain: the bowl is emptied by hand rather than automatically. It suits installations that are checked regularly. Automatic (A) and differential-pressure (blank) drains are available in the same size if you prefer unattended draining.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.