The AirTAC GFR200C06MF2T AirTAC Filter Regulator 1/8 in NPT is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200C06MF2T is a filter regulator: it removes water and particulate from compressed air and holds downstream pressure at your setpoint in one compact body. This 200-size unit is threaded 1/8 in NPT, carries the standard 40 um filter element, and has a manual drain for emptying the bowl. Pressure is set with the embedded square gauge on the psi scale, the regulator is the standard type with a 0.05-0.9 MPa (7-130 psi) adjustment range, and the maximum inlet pressure is 1.0 MPa (145 psi). Operating temperature is -5 to 70 C (non-freezing), the 200-size bowl is polycarbonate (PC), and a mounting bracket is included.
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with ports from 1/8 to 1 in, and options across the range include automatic or differential-pressure drains, a finer 5 um element (code W), gauge scales in MPa, psi or bar, and G (BSPP) or NPT threads in place of the PT standard. Flow is published as curves rather than a single rating, so ask us to confirm figures from the datasheet for your application.
| Model | GFR200C06MF2T AirTAC Filter Regulator 1/8 in NPT |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Feeds clean, dried and pressure-regulated air to the clamping cylinders on a machining fixture, holding a steady setpoint so workholding behaves consistently across a shift. The manual drain suits a point the operator already visits during setup and housekeeping.
Mounted at the inlet of a machine's solenoid-valve manifold, it stops scale and condensed water reaching the valves while keeping supply pressure where the circuit designer set it. The 1/8 in NPT port and included bracket make it easy to place inside a compact panel.
Conditions the air feeding the small cylinders and air jets on a cartoning or labelling line, where a stable regulated supply keeps timing and stroke behaviour repeatable. The psi-scale square gauge lets line staff read and restore the setpoint at a glance.
Size the unit by port and flow: the 200 size with its 1/8 in NPT port suits compact circuits, while stepping up to 300, 400 or 600 gives larger ports for higher demand. Choose the drain to match service: manual (as specified here) where the bowl is emptied during routine checks, automatic for unattended condensate removal, or the differential-pressure default. The 40 um element is standard; specify 5 um (code W) where finer filtration is needed. Gauge scale (MPa, psi or bar), thread (PT standard, with G or NPT as order options) and the bracket are all selectable. Because flow is published as curves rather than a single rated figure, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes GFR flow as curves rather than a single rated figure, so we do not quote a number here. Tell us your application and we will confirm the flow and the full datasheet figures for this unit on request before you order.
The M in the code specifies a manual drain: condensate collected in the bowl is emptied by hand rather than automatically. It suits points that are checked during routine maintenance. For unattended duty, choose the automatic-drain or differential-pressure-drain version of the same size.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.