The AirTAC GFR200C06MF2W AirTAC Filter Regulator PT1/8, 5 um is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200C06MF2W is a filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in one compact body. This unit is the size 200 frame with a PT1/8 (1/8 in) port, a 5 um filter element (the finer of the two published grades), a manual drain on the bowl, and the standard regulator fitted with an embedded square gauge scaled in psi. Maximum inlet pressure is 1.0 MPa (145 psi), the regulating range with manual drain is 0.05-0.9 MPa (7-130 psi), and the operating temperature is -5 to 70 C (non-freezing). The polycarbonate bowl suits this smaller frame, and a mounting bracket is included.
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with port sizes from 1/8 to 1 in, and each size can be ordered with a different drain type, 40 um or 5 um filtration, a different gauge scale, PT thread as standard with G (BSPP) and NPT as options, and with or without a bracket or reverse/check valve. Flow is published as curves rather than a single rating, so ask us to confirm the datasheet and sizing figures for your application before ordering.
| Model | GFR200C06MF2W AirTAC Filter Regulator PT1/8, 5 um |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Point-of-use conditioning for the air feeding solenoid valves and tool-clamp circuits on a machining centre: the 5 um element screens water and fine particulate before pilot valves, and the square psi gauge lets setters read and lock the clamp-circuit set pressure directly.
Filtered, regulated air for the small cylinders and grippers that run case packers, labellers and filling heads. The 1/8 in port suits compact point-of-drop takeoffs, and the manual drain lets the line operator bleed collected water at end-of-shift checks.
A compact filter regulator for bench rigs and panel builds where a test circuit needs clean air held at a repeatable setpoint: the 5 um grade protects sensitive instruments, the psi scale matches US gauges, and the included bracket simplifies panel mounting.
Choose the size by the port and flow step: 200 is the smallest frame, stepping up through 300, 400 and 600 as port and flow demand rise - match the 1/8 in PT port on this unit to your line size. Drain type is a real choice: manual (this unit, which gives the wider 0.05-0.9 MPa regulating range) versus automatic or differential-pressure; manual suits points where an operator can bleed the bowl as part of a routine. Filter grade is 40 um standard or 5 um (this unit, code W) for finer protection of downstream components. The embedded square gauge is standard - an external round gauge and MPa, psi or bar scales are options - and PT thread is standard with G (BSPP) and NPT orderable. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves rather than a single rated figure, so we do not quote a number here. Tell us your application and line conditions and we will confirm the flow and sizing data from the datasheet on request before you order.
The M in the code sets a manual drain: an operator opens the bowl drain to expel collected water instead of relying on an automatic or differential-pressure drain. On this configuration the manual drain also gives the wider 0.05-0.9 MPa (7-130 psi) regulating range, and the 5 um element (code W) is the finer of the two published filter grades.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.