The AirTAC GFR200C06MF3TK AirTAC Filter Regulator NPT1/8, Manual Drain is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200C06MF3TK is a filter regulator: it removes water and particulate from compressed air and holds downstream pressure steady in a single body. This configuration is the 200 size with a 1/8 in NPT port, a manual drain, a 40 um filter element, an embedded square gauge scaled in bar, and a reverse (check) valve fitted; a mounting bracket is included. Maximum inlet pressure is 1.0 MPa (145 psi), the regulating range is 0.05-0.9 MPa (7-130 psi), and the working temperature range is -5 to 70 C (non-freezing).
It is a genuine AirTAC part. The GFR family is published in 200, 300, 400 and 600 sizes with port sizes from 1/8 in up to 1 in, and with choices of drain type, 5 um or 40 um filtration, gauge style and scale, G/NPT thread options and bracket fitting. Flow is published as curves rather than a single rating, so ask us to confirm the datasheet figures for your application before you order.
| Model | GFR200C06MF3TK AirTAC Filter Regulator NPT1/8, Manual Drain |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Point-of-use filtered and regulated air for the tool-clamp cylinders on a CNC machining centre, with the bar-scale gauge set at the clamp pressure and the fitted check valve holding the circuit through upstream pressure dips.
Supplying the pneumatic tape heads and flap-fold cylinders on a carton sealing line, where the 40 um element keeps pipe scale out of the directional valves and the regulator holds one steady setting shift after shift.
Regulated air for the weld-gun clamp and tip-dresser cylinders in a robotic welding cell; the manual drain suits a cell that is bled down and serviced at every shift change.
Size and port step up together across 200 / 300 / 400 / 600, from 1/8 in to 1 in, so choose the size whose flow curve covers your demand with margin - we can check the curve against your consumption before you order. Drain type matters: this unit has a manual drain, which suits attended installations and gives the full 0.05-0.9 MPa (7-130 psi) regulating range; automatic and differential-pressure drains are available on other GFR variants. Filtration is 40 um as standard, with a 5 um (code W) element optional. The embedded square gauge is standard here in bar, with MPa, psi or bar scales and an external round gauge available. Thread on this unit is NPT; PT is the standard catalogue thread and G (BSPP) is also an order option. A mounting bracket is included.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes GFR flow as curves, not as a single rated figure, so we do not quote a number here. Tell us your working pressure and air consumption and we will confirm the flow from the datasheet curve for this 200-size, 1/8 in port unit before you order.
This unit is ordered with a manual drain: the bowl is drained by hand, which suits attended installations and gives the full 0.05-0.9 MPa (7-130 psi) regulating range. Automatic (code A) and differential-pressure (blank) drains are available on GFR variants where the installation runs unattended.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.