The AirTAC GFR200C06MJC2GK AirTAC Filter Regulator G1/8 is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR200C06MJC2GK is an AirTAC GFR200 filter regulator: water and particulate filtration plus pressure regulation combined in a single body. This configuration has a G1/8 (1/8 in) port with G (BSPP) thread, a 40 um standard filter element, a manual drain, and a round pressure gauge with a psi scale. A reverse/check valve is fitted, and the unit is supplied without a mounting bracket. Maximum inlet pressure is 1.0 MPa (145 psi), the regulator adjusts from 0.05 to 0.9 MPa (7-130 psi), and the working temperature range is -5 to 70 C, non-freezing. At this 200 size the bowl is polycarbonate; only the 600 size uses aluminium alloy.
This is a genuine AirTAC part. The GFR family spans 200, 300, 400 and 600 sizes with ports from 1/8 in to 1 in, and options including automatic or manual draining, a 5 um element (code W), square or round gauges with MPa, psi or bar scales, and G or NPT threads. Flow is published as curves rather than a single rated figure, so we confirm datasheet and sizing figures on request.
| Model | GFR200C06MJC2GK AirTAC Filter Regulator G1/8 |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Conditioning the air feeding vacuum ejectors and gripper cylinders on a small pick-and-place cell: the 40 um element keeps particulate out of the ejector while the regulator holds a steady working pressure, and the check valve helps hold downstream pressure if the supply dips.
Supplying filtered, regulated air to the cylinder-driven capping and labeling stations on a bottling line, with the manual drain letting an operator bleed off accumulated water at the start of each shift.
Mounting ahead of the solenoid valve manifold on a pneumatic assembly fixture, so the valves and downstream cylinders receive clean air at a set pressure rather than raw supply air.
Within the GFR family you step up through the 200, 300, 400 and 600 sizes, each with larger ports from 1/8 in to 1 in, as your required flow grows. Drain choice matters: this code has a manual drain, which allows regulation from 0.05 MPa, while automatic and differential-pressure drain versions regulate from 0.15 MPa. The standard element is 40 um; specify code W for a 5 um element where finer filtration is needed. Gauges are an embedded square gauge or an external round gauge with MPa, psi or bar scales - this unit carries a round psi gauge. Threads are PT as standard with G and NPT as order options, and the mounting bracket can be included or omitted (this code omits it). Because AirTAC publishes flow only as curves and not as a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves rather than a single rated figure, so we do not quote a number here. Tell us your inlet pressure and the flow your downstream equipment needs, and we will confirm the sizing against the datasheet on request.
The M in the code specifies a manual drain: an operator opens the drain to expel the water that collects in the bowl. If you prefer automatic or differential-pressure draining, those are available as separate codes within the same GFR200 family - ask us for the matching part number.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.