The AirTAC GFR200C06MJC2K AirTAC Filter Regulator PT1/8 Manual Drain is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200C06MJC2K is a size-200 filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in a single body. This configuration is threaded PT1/8 (1/8 in PT as standard, with G and NPT available as order options), carries a 40 um standard filter element, and drains condensate manually via its drain valve, so an operator empties the polycarbonate bowl as part of routine checks. Pressure is set across the standard regulation range and read on the fitted external round gauge with a psi scale, and a reverse/check valve is fitted to hold the downstream setting if upstream supply is interrupted. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C (non-freezing).
This is a genuine AirTAC part from the GFR filter-regulator line, which spans sizes 200, 300, 400 and 600 with port sizes from 1/8 in to 1 in, a choice of manual, automatic or differential-pressure drains, an optional 5 um element (code W), gauge scale options, and a low-pressure variant. Rated flow for this series is published as curves rather than a single figure, so ask us to confirm the datasheet and sizing for your application before ordering.
| Model | GFR200C06MJC2K AirTAC Filter Regulator PT1/8 Manual Drain |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Feeding clean, regulated air to the air-assist and clamping circuits of a compact CNC mill or engraver, where the 1/8 in port matches the machine's instrument-air take-off and the psi gauge lets operators set and verify working pressure at the machine.
Conditioning shop air for lab benches and test rigs that drive pneumatic actuators and sample-handling cylinders, with the manual drain allowing technicians to bleed accumulated condensate at the start of each shift and the check valve holding the set pressure during supply dips.
Regulating and filtering air at the drop point for small packaging and cartoning machines - diverters, sealers and pick-off cylinders - where a compact filter regulator at each drop keeps the 40 um element protecting valve seals from water and pipe scale.
Start with the port step: size 200 with PT1/8 suits lines plumbed at 1/8 in, and larger GFR sizes (300/400/600) step up in port and flow capacity - match the size to the air demand of the circuit rather than oversizing on price alone. Choose the drain to match access: this unit is manual drain, which suits attended installations where an operator can bleed the bowl; pick automatic or differential-pressure drain codes where the unit is mounted in a hard-to-reach position. The 40 um element is the standard grade for general plant air; specify the 5 um W-code element where downstream equipment needs finer filtration. The fitted round gauge here reads in psi; MPa and bar scales are also available, and the embedded square gauge is the standard alternative. Thread is PT as standard with G (BSPP) and NPT as order options, and this J-code unit comes without a mounting bracket - add a bracket code if the unit will be panel- or wall-mounted. Because flow is published as curves rather than a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as characteristic curves rather than a single rated figure, so we do not quote one number. Tell us your inlet pressure and the flow your circuit needs and we will confirm the sizing from the datasheet curves on request before you order.
This M-code configuration drains condensate manually: an operator opens the drain valve to empty the bowl, which suits accessible, attended installations. If the unit will be mounted where it cannot easily be reached, the GFR series is also available with automatic or differential-pressure drain codes - ask us for the alternative model.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.