The AirTAC GFR200C06MJC2WG AirTAC Filter Regulator G1/8, 5 um is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR200C06MJC2WG is an AirTAC GFR200 filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in one compact body. This configuration is built around a G1/8 (1/8 in) G-thread port, a 5 um filter element for finer filtration than the 40 um standard, and a manual drain you operate by hand to empty collected condensate. It is the standard regulator type with an adjustment range of 0.05-0.9 MPa (7-130 psi), a maximum inlet pressure of 1.0 MPa (145 psi), and an external round pressure gauge fitted with a psi scale. Operating temperature is -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The GFR family is available in sizes 200, 300, 400 and 600 with a full set of decodable options: port sizes from 1/8 in to 1 in, PT (standard), G or NPT threads, differential-pressure, automatic or manual drains, 40 um or 5 um filtration, gauge scale in MPa, psi or bar, and bracket choices. Flow is published as curves rather than a single rated figure, so we confirm the datasheet and flow figures for your application on request.
| Model | GFR200C06MJC2WG AirTAC Filter Regulator G1/8, 5 um |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Point-of-use conditioning on a CNC machining center: the 5 um element protects the machine's air pilot components from water and fine particulate, while the regulator holds a steady supply pressure to the tool changer and clamping circuits.
Feeding cylinders and diverters on a packaging conveyor line, where the regulator keeps actuator speed consistent and the manual drain lets operators clear condensate at each shift check.
A bench-mounted supply for pneumatic assembly tools and air cylinders at an assembly station: filtered, regulated air at the workstation with a psi gauge the operator can read at a glance.
Size and port set the capacity envelope: the 200 size with its 1/8 in port suits compact drops and light-duty circuits, while stepping up to 300, 400 or 600 increases both port size and flow capacity, so match the size to the air demand of the circuit rather than only the fitting. This unit carries the 5 um element (code W); choose it where finer particulate removal matters, and stay with the 40 um standard where coarser protection is enough. The manual drain means an operator empties the bowl periodically - pick automatic or differential-pressure drain codes if the installation is unattended. The fitted round gauge reads in psi; MPa and bar scales are also available. Thread here is G, with PT standard and NPT orderable as options, and this configuration has no mounting bracket (code J).
Because AirTAC publishes flow as curves rather than a single rated number, we do not quote a rated flow figure. Ask us to confirm sizing and the full datasheet against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves rather than a single rated figure, so we do not state a rated flow number, Cv or SCFM value. Send us your application details and we will confirm the flow curve and full datasheet figures for this exact model on request before you order.
The M in the code specifies a manual drain: condensate collected in the bowl is emptied by hand rather than automatically. Manual drain suits attended installations on a regular maintenance round; for unattended or hard-to-reach points, choose an automatic (A) or differential-pressure (blank) drain code instead. Also note this unit carries the 5 um element (code W) rather than the 40 um standard.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.