The AirTAC GFR200C06MJC2WT AirTAC Filter Regulator NPT1/8 is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR200C06MJC2WT is an AirTAC GFR-series filter regulator: one compact body that removes water and particulate from compressed air and holds downstream pressure steady. This size 200 unit is threaded NPT1/8 (1/8 in), carries the finer 5 um filter element (code W; 40 um is the standard grade), drains by hand through its manual drain, and is supplied with an external round pressure gauge reading in psi. The polycarbonate bowl suits non-freezing air from -5 to 70 C, maximum inlet pressure is 1.0 MPa (145 psi), and the standard regulator adjusts from 0.05 to 0.9 MPa (7-130 psi). Code J means no mounting bracket is fitted.
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with ports from 1/8 to 1 in, and can be ordered with automatic or differential-pressure drains, a 40 um or 5 um element, embedded square or external round gauges in MPa, psi or bar scales, G (BSPP) or NPT threads in place of the PT standard, and a reverse/check valve. AirTAC publishes flow as curves rather than a single rated figure, so ask us and we will confirm the datasheet figures for your application on request.
| Model | GFR200C06MJC2WT AirTAC Filter Regulator NPT1/8 |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Feeding clean, regulated air to the clamping cylinders on a small pneumatic press: the 5 um element helps keep valve spools clear, and the round psi gauge lets an operator set and check clamp pressure at the machine.
Conditioning the supply to divert and stopper cylinders on a packaging conveyor, with the manual drain emptied during shift changeovers so accumulated water never reaches the directional valves.
Preparing air at a spray-gun drop in a finishing booth: the 5 um grade reduces particulate in the supply, and the regulator lets the finisher set gun pressure against the psi gauge.
Match the size and port to the air your circuit actually uses: 200 is the smallest GFR frame, here with a 1/8 in NPT port, so step up to 300, 400 or 600 if your line draws more air. This unit pairs a 5 um element with a manual drain - the finer grade suits sensitive downstream components, but the bowl must be emptied by hand, so plan it into a maintenance route. With the manual drain, the regulation window is 0.05-0.9 MPa (7-130 psi), reaching lower than the 0.15 MPa floor of the automatic and differential-drain versions. The round psi gauge is fitted; an embedded square gauge and MPa or bar scales are the alternatives. Thread is NPT here, PT is the AirTAC standard and G (BSPP) is also orderable, and code J omits the mounting bracket. Because AirTAC publishes flow as curves rather than a single rated number, send us your application and we will confirm sizing from the datasheet before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes GFR flow as performance curves rather than a single rated figure, so we do not quote a number here. Tell us your application and operating pressure and we will confirm the datasheet curve and sizing for this unit on request.
Code M fits the manual drain: the bowl is emptied by hand instead of by automatic or differential-pressure action. It also widens the regulator adjustment range to 0.05-0.9 MPa (7-130 psi), versus 0.15-0.9 MPa (20-130 psi) on the automatic and differential-drain versions. Choose it where the unit sits on an easy maintenance route.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.