The AirTAC GFR200C06MJC2WTK AirTAC Filter Regulator NPT1/8 is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200C06MJC2WTK is a GFR-series filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in a single body. This configuration is the 200 size with a 1/8 in NPT port, the finer 5 um filter element, a manual drain for emptying the bowl by hand, a round pressure gauge reading in psi, and a built-in reverse (check) valve. It is supplied without a mounting bracket. The standard regulator covers 0.05-0.9 MPa (7-130 psi), maximum inlet pressure is 1.0 MPa (145 psi), and the operating temperature range is -5 to 70 C (non-freezing). The bowl on the 200 frame is polycarbonate (PC).
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with ports from 1/8 to 1 in, and the catalogue options include 40 um standard or 5 um filtration, differential-pressure, automatic or manual drains, embedded square or external round gauges scaled in MPa, psi or bar, G (BSPP) or NPT threads in place of the PT standard, and bracket choice. Flow is published as curves rather than a single rated figure, so ask us to confirm sizing and datasheet figures for your application.
| Model | GFR200C06MJC2WTK AirTAC Filter Regulator NPT1/8 |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Feeding clamp cylinders and pneumatic press heads on a fixture: the 5 um element keeps water and pipe scale out of the valve stack while the regulator holds the set clamping pressure and the fitted check valve stays in the circuit.
Point-of-use preparation on a machining centre's pneumatic circuit: clean, regulated air to the tool changer and workholding, with the round psi gauge giving the operator a direct read of the set pressure at the machine.
Supplying gripper and divertor actuators on a packaging or bottling line, where the 1/8 in NPT port suits compact drop lines and the manual drain lets maintenance empty the bowl during planned changeovers.
Every choice in this unit is decodable from the code. Step through sizes 200/300/400/600 to match the port and flow path your line needs - the 200 size here carries a 1/8 in NPT port. Choose the drain: differential-pressure (the default), automatic, or manual as fitted here, which means the bowl is emptied by hand on a schedule you set. Pick 40 um standard filtration or the 5 um W grade fitted here for finer protection of downstream components. Gauges are embedded square as standard or external round, scaled in MPa, psi or bar - this unit carries a round psi gauge. Threads: PT is the standard, with G (BSPP) and NPT as order options; this unit is NPT. Brackets are optional, and this unit is ordered without one. Because flow is published as curves rather than a single rated figure, send us your application details and we will confirm sizing against the datasheet before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes GFR flow as curves rather than a single rated figure, so we do not quote a number here. Tell us your application and we will confirm the flow and the full datasheet figures for this exact model on request.
The M in the code fits a manual drain: the bowl is emptied by hand rather than automatically. If you would rather not rely on operator attention, the same family is available with a differential-pressure drain (the default) or an automatic drain.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.