The AirTAC GFR200C06MJC3T AirTAC Filter Regulator NPT 1/8 in is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200C06MJC3T is a GFR-series filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in one compact body. This 200-size unit is threaded NPT 1/8 in, carries a manual drain on the bowl, a 40 um standard filter element, and a round pressure gauge with a bar scale. It is a standard-type regulator with an adjustment range of 0.05-0.9 MPa (7-130 psi), a maximum inlet pressure of 1.0 MPa (145 psi), and an operating temperature of -5 to 70 C (non-freezing). No mounting bracket is included with this configuration.
This is a genuine AirTAC part. The GFR family spans 200, 300, 400 and 600 sizes with ports from 1/8 to 1 in, and can be ordered with automatic or differential-pressure drains, a 5 um (W) filter element, an embedded square gauge or an optional external round gauge in MPa, psi or bar scales, and PT, G or NPT threads. Flow is published as curves rather than a single rated figure, so ask us to confirm the datasheet and sizing for your application.
| Model | GFR200C06MJC3T AirTAC Filter Regulator NPT 1/8 in |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Filtered, regulated air to clamp cylinders on a machining or assembly fixture, with the bar-scale round gauge letting an operator set and check clamp pressure right at the fixture.
Point-of-use air preparation for diverters, pushers and small cylinders on a packaging conveyor, where the manual drain suits a line that is shut down on a regular maintenance schedule.
Clean, pressure-controlled air to spray guns in a finishing booth; the 40 um element removes water and grit that would otherwise spoil the finish.
Choose the size by port and required flow: this 200-size unit takes a 1/8 in NPT port, while the larger 300, 400 and 600 sizes step up in port and flow capacity. Drain options are differential-pressure (default), automatic (A) or manual (M); this unit is manual, so the bowl is emptied by opening the drain when servicing. Filter grade is 40 um standard, with a 5 um element available via the W suffix where finer filtration is needed. For the gauge, an embedded square gauge is standard and an external round gauge is optional in MPa, psi or bar scales; this unit carries a round gauge on a bar scale. The thread here is NPT; PT is the standard thread and G (BSPP) is also a catalogue option. The J suffix deletes the mounting bracket, as on this unit. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves rather than a single rated figure, so we do not quote a number here. Ask us and we will confirm the flow curve and datasheet figures against your application before you order.
A manual drain (code M) empties the bowl only when it is opened, which suits machines that are shut down regularly for maintenance. If the unit must run unattended, the same series offers automatic (A) and differential-pressure drain options that discharge condensate without operator action.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.