The AirTAC GFR200C06MJF2K AirTAC Filter Regulator PT1/8, 40 um is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR200C06MJF2K is an AirTAC GFR200 filter regulator: water and particulate filtration plus pressure regulation combined in a single body. This size 200 unit is threaded PT1/8 (1/8 in, PT standard), filters to 40 um, drains by hand via the manual drain, and regulates from 0.05 to 0.9 MPa (7-130 psi). The embedded square gauge reads in psi, a reverse/check valve is fitted to hold downstream pressure, and no mounting bracket is included.
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with port sizes from 1/8 in to 1 in, a choice of manual, automatic or differential-pressure drain, 40 um or 5 um filtration, MPa/psi/bar gauge scales, and G or NPT thread options. Flow for this unit is published as curves rather than a single rating, so ask us to confirm the datasheet figures for your application.
| Model | GFR200C06MJF2K AirTAC Filter Regulator PT1/8, 40 um |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Feeding clean, regulated air to the cylinders and actuators of a compact carton-sealing or labelling machine, with the psi gauge giving the operator a direct setpoint readout at the machine.
A single-point supply for air tools and blow guns at an assembly bench: 40 um filtration keeps grit and condensate out of the tools while the regulator holds a steady working pressure.
Conditioning the air feeding pilot valves and positioners on a process skid, where the fitted check valve holds downstream pressure during upstream dips and the compact 1/8 in port suits tight panel routing.
Size 200 with a PT1/8 port is the entry step of the GFR range; step up to 300, 400 or 600 when the line needs a larger port and more flow. The manual drain on this unit suits points of use that are checked regularly; choose automatic or differential-pressure drain where the bowl cannot be drained by hand. Filtration is 40 um as standard - specify 5 um (code W) only where downstream equipment demands finer filtration. The fitted square gauge reads in psi; MPa and bar scales are available, and an external round gauge is an option. Thread is PT as standard; G (BSPP) and NPT are order options. No mounting bracket is included with the J code - add one if the unit needs panel fixing. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves rather than a single rated figure, so we do not quote one number. Tell us your line pressure and the flow your application needs, and we will confirm against the datasheet whether this PT1/8, size 200 unit is correctly sized before you order.
The M in the code specifies a manual drain: condensate collected in the bowl is released by hand, which suits points of use that are inspected regularly. If the installation is unattended, the same GFR200 unit can be ordered with an automatic (A) or differential-pressure drain instead.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.