The AirTAC GFR200C06MJF2WG AirTAC Filter Regulator G1/8, 5 um is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200C06MJF2WG is a size-200 filter regulator: water and particulate filtration plus pressure regulation combined in one body. This configuration is built with a 1/8 in (G1/8) threaded port, a 5 um filter element for finer dirt and condensate capture than the standard 40 um grade, a manual drain on the PC (polycarbonate) bowl that you open by hand to expel collected water, and an embedded square gauge reading in psi so the set pressure is visible at a glance. The standard regulator covers an adjustment range of 0.05-0.9 MPa (7-130 psi) with a maximum inlet pressure of 1.0 MPa (145 psi), and the unit operates from -5 to 70 C in non-freezing conditions. No mounting bracket is included in this variant.
This is a genuine AirTAC part from the G-series filter regulator line, which spans sizes 200, 300, 400 and 600 with port sizes from 1/8 in up to 1 in, a choice of manual, automatic or differential-pressure drains, 40 um or 5 um filtration, gauge scale options, and PT, G or NPT threads. We confirm flow and datasheet figures on request, since flow is published as curves rather than a single rating.
| Model | GFR200C06MJF2WG AirTAC Filter Regulator G1/8, 5 um |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Mounted ahead of the solenoid valve manifold on a CNC machining center, this unit filters machining-air moisture and fine particles down to 5 um and holds a steady regulated pressure to the tool-change and clamping circuits.
On a carton-sealing or case-packing conveyor line, the regulator sets a consistent supply pressure to the flap-fold and pusher cylinders while the 5 um element protects the sealing heads from dirt carried in the shop air.
Feeding spray guns in a finishing booth, this filter regulator drops line pressure to the setting the gun needs and removes water and fine particulate that would otherwise blemish the coating finish.
Size and port: the 200 frame with its 1/8 in port sits at the small end of the GFR range; step up to 300, 400 or 600 when the line demands a larger port and more flow. Drain: manual suits installations that are checked regularly; choose automatic or differential-pressure drain codes if the bowl should empty itself. Filtration: this unit carries the 5 um (W) element - select the standard 40 um grade instead when only coarse protection is needed. Gauge: the fitted square gauge here reads psi; MPa or bar scales and an external round gauge are alternatives. Thread: PT is the standard, with G (BSPP) and NPT available as order options. Bracket: this variant omits the mounting bracket; bracketed variants exist. One honest note before you order: flow is published as curves, not a single rating, so ask us to confirm sizing against your application.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves, not as a single rated figure, so we do not quote a rated flow number. Tell us your line pressure and the air demand of your equipment and we will confirm the sizing from the datasheet curves on request before you order.
The M in the code specifies a manual drain: water collected in the polycarbonate bowl is released by opening the drain by hand. It suits stations that are inspected on a routine schedule. If the installation is unattended or the air is wet, the automatic (A) or differential-pressure (blank) drain variants empty the bowl without operator action.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.