The AirTAC GFR200C06MJF2WT AirTAC Filter Regulator NPT1/8, 5 um is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200C06MJF2WT is a filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in a single body. This configuration is the size 200 unit with a 1/8 in NPT port, a fine 5 um filter element (the W grade, against the 40 um standard), a manual drain on the bowl, and an embedded square gauge reading in psi. The standard regulator covers 0.05-0.9 MPa (7-130 psi) outlet adjustment, maximum inlet pressure is 1.0 MPa (145 psi), and the working temperature range is -5 to 70 C (non-freezing). The bowl on this size is polycarbonate (PC), the unit ships without a mounting bracket (code J), and no reverse/check valve is fitted.
This is a genuine AirTAC part. The GFR family is available in sizes 200, 300, 400 and 600 with ports from 1/8 in to 1 in, PT thread as standard and G or NPT as order options, a choice of differential-pressure, automatic or manual drains, 40 um or 5 um filter grades, and gauge scales in MPa, psi or bar. Flow for this series is published as curves rather than a single rated figure, so ask us to confirm the datasheet figures for your application on request.
| Model | GFR200C06MJF2WT AirTAC Filter Regulator NPT1/8, 5 um |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Fitted at the drop feeding a CNC machining center's clamping fixtures and tool-change cylinders, it strips water and fine particles from the shop air and holds a steady regulated pressure so workholding behaves consistently through the shift.
Mounted ahead of the pick-and-place and flap-fold cylinders on a carton packing conveyor, it conditions the air to 5 um cleanliness and sets the working pressure the cylinders were sized for, with the psi gauge giving operators a visible setpoint.
Used on the compressed-air feed to a lab automation bench driving small actuators and valves, where the fine 5 um element protects sensitive components and the manual drain suits a supervised, intermittently used installation.
Size and port step up together across the GFR range (200 through 600, 1/8 in to 1 in), so pick the size whose flow curve covers your demand with margin - we can check the curve against your consumption before you order. This unit carries the 5 um element (code W); choose it where finer particulate removal matters, or step back to the 40 um standard grade for general plant air. Drain choice matters: this model has a manual drain, which needs periodic bleeding by an operator, while automatic and differential-pressure drain versions are available in the same family. The square gauge here reads in psi (scale 2); MPa and bar scales are alternatives. Thread is NPT on this code; PT is the standard and G (BSPP) is the other order option. The J code means no mounting bracket is supplied - order a bracket version if you want panel or wall fixing.
One honest note on sizing: AirTAC publishes flow for this series as curves, not as a single rated number, so we cannot quote a rated flow figure here. Send us your application details and we will confirm the sizing from the datasheet on request.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as performance curves rather than a single rated figure, so we do not quote a rated flow number for this unit. Tell us your application and air consumption and we will confirm the sizing against the datasheet curves on request.
This unit's bowl has a manual drain, so collected water must be bled off periodically by an operator rather than discharged automatically. If you prefer unattended operation, the same GFR200 family is available with automatic (code A) or differential-pressure (blank code) drains - ask us for those variants.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.