The AirTAC GFR200C06MJF3WT AirTAC Filter Regulator NPT1/8, 5 um is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR series combines water and particulate filtration with pressure regulation in a single body. This GFR200 unit connects to a 1/8 in NPT port, carries a 5 um filter element for finer cleaning than the standard 40 um grade, drains by hand through its manual drain, and shows set pressure on an embedded square gauge scaled in bar. The standard-type regulator adjusts from 0.05 to 0.9 MPa (7-130 psi), maximum inlet pressure is 1.0 MPa (145 psi), operating temperature is -5 to 70 C (non-freezing), and no mounting bracket is included with this code.
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with ports from 1/8 to 1 in, and can be ordered with automatic or differential-pressure draining, a 40 um or 5 um element, G or NPT threads in place of PT, an external round gauge, and MPa, psi or bar gauge scales. Flow figures are published as curves rather than a single rating, so ask us to confirm the datasheet for your application.
| Model | GFR200C06MJF3WT AirTAC Filter Regulator NPT1/8, 5 um |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Mounted at the point of use on a packaging machine, this compact 1/8 in filter regulator cleans the air to 5 um ahead of a small pneumatic gripper and holds the set pressure that the gripper circuit was tuned for.
Inside a bottling-plant control cabinet, the unit filters and regulates the pilot-air feed to solenoid valves and I/P converters, with the embedded square bar gauge reading cleanly against the panel's other bar-scaled instruments.
On a laboratory sample-prep bench, the 5 um element strips fine particulate and condensed water from the compressed-air feed to an analytical instrument, while the regulator keeps the supply at the pressure the instrument expects.
Size and port set the capacity: the 200 frame with a 1/8 in NPT connection suits compact point-of-use circuits, while the 300, 400 and 600 frames step up port size and flow. Choose the drain to match service: manual draining (this unit) needs an operator to bleed the bowl, automatic drains continuously, and the differential-pressure default drains only when the pressure drop calls for it. Pick the 5 um element (this unit) when downstream equipment needs finer air than the 40 um standard, and select the gauge scale - MPa, psi or bar - to match your panel. Threads come as PT as standard with G and NPT as order options; brackets are optional. Flow is published as curves, not a single rated figure, so send us your flow requirement and we will confirm sizing against the datasheet before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves rather than a single rated figure, so we do not quote a number here. Send us your flow requirement and we will confirm the sizing from the datasheet on request.
This code drains by hand: an operator opens the drain to bleed collected water from the bowl, which suits installations checked during routine maintenance rounds. If the unit is hard to reach or runs continuously, the same GFR family can be ordered with an automatic or differential-pressure drain instead.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.