The AirTAC GFR200C06MLC1TK AirTAC Filter Regulator NPT1/8 is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR200C06MLC1TK is an AirTAC GFR-series filter regulator: it removes water and particulate from compressed air through a 40 um element and regulates downstream pressure in the same body. This unit is the low-pressure type, size 200, with a 1/8 in NPT port. It is fitted with a manual drain, a round pressure gauge reading in MPa, a reverse (check) valve, and a mounting bracket.
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with ports from 1/8 in to 1 in, and options for drain type, 5 um filtration (code W), gauge style and scale, and G or NPT thread in place of the PT standard. Flow is published as curves rather than a single rating, so ask us to confirm the figures for your application.
| Model | GFR200C06MLC1TK AirTAC Filter Regulator NPT1/8 |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Feeds clean, moisture-reduced and pressure-regulated air to a directional control valve manifold on a packaging line, with the check valve holding the circuit against backflow and the manual drain cleared at shift start.
Conditions the air feeding a laboratory or pilot-scale process skid, where the low-pressure regulation type and a visible MPa gauge let an operator set and read a gentle supply pressure at the bench.
Serves as the conditioning point for a small gripper or pick-and-place module on an assembly cell, where the 1/8 in port matches the device's compact air connection and the bracket gives a tidy panel mounting.
Every choice in this code is decodable. Step through sizes 200/300/400/600 to match the port and the flow your line needs - the 200 size with a 1/8 in NPT port suits compact branches and individual devices. Choose the drain: differential-pressure (default), automatic (A) or manual (M) as fitted here. Choose the filter grade: 40 um standard or 5 um with code W. Gauges are embedded square as standard with an optional external round gauge in MPa, psi or bar scale; this unit carries the round MPa gauge. Thread is PT as standard, with G (BSPP) and NPT as order options, and the bracket is included (code J omits it). Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes GFR-series flow as curves rather than a single rated figure, so we do not quote a number here. Send us your application details and we will confirm the flow and datasheet figures for this unit on request before you order.
Code M is the manual drain: condensate collected in the bowl is released by hand. The family also offers a differential-pressure drain (default) and an automatic drain (code A). Manual suits points that are attended regularly, while automatic or differential-pressure draining removes the need to visit the unit.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.