The AirTAC GFR200C06MLC1WT AirTAC Filter Regulator, NPT1/8 is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200C06MLC1WT is a size-200 filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in one compact body. This configuration is the low-pressure type, fitted with a 5 um filter element (the finer of the two published grades), a manual drain on the metal bowl, an external round pressure gauge scaled in MPa, and NPT1/8 (1/8 in) ports. Because it is the low-pressure type, it is intended for circuits that run below standard regulator settings; the exact adjustment range for this variant is not published, and we confirm it from the datasheet on request.
This is a genuine AirTAC part. The GFR family is offered in sizes 200, 300, 400 and 600 with ports from 1/8 in to 1 in, a choice of 40 um or 5 um filtration, manual, automatic or differential-pressure drains, square or round gauges with MPa, psi or bar scales, and PT, G or NPT threads. Flow is published as curves rather than a single rating, so we confirm sizing and datasheet figures on request before you order.
| Model | GFR200C06MLC1WT AirTAC Filter Regulator, NPT1/8 |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
A low-pressure filter regulator keeps fixture and clamp cylinders supplied with clean, moisture-reduced air at a gentle, stable setting, with the 5 um element protecting small control valves on the clamp circuit.
On a test bench or lab process skid, the fine 5 um grade and low-pressure regulation suit instruments and actuators that need clean air at modest pressures, with the round MPa gauge giving a clear local reading.
Feeding a compact sub-panel of directional valves and small cylinders on packaging machinery, the unit filters and regulates in one body, and the manual drain suits a machine that is blown down at each shift end.
Start with the port step: this unit is size 200 with NPT1/8 ports, the smallest in the GFR range, so step up to size 300, 400 or 600 if your line needs more flow capacity. Filtration here is 5 um (code W); the standard grade is 40 um, so choose this variant only where finer particle removal matters. The manual drain means an operator opens the bowl drain periodically - if nobody is at the machine regularly, consider an automatic or differential-pressure drain variant instead. The round gauge is scaled in MPa; psi and bar scales are available as options. NPT is the thread on this code; PT (standard) and G are the other orderable options. Flow for GFR units is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for GFR units as curves, not as a single rated number, so we do not quote a figure. Tell us your application and we will confirm the flow and the full datasheet for this model on request before you order.
The M in the code selects the manual drain: an operator opens the bowl drain to remove collected water. It suits machines attended regularly. If the unit will be left unattended, ask about automatic or differential-pressure drain variants of the same GFR200 size.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.