The AirTAC GFR200C06MLC2GK AirTAC Filter Regulator G1/8, Low-Pressure is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR200C06MLC2GK is an AirTAC GFR200 filter regulator: it removes water and particulate from compressed air through a 40 um element and regulates downstream pressure in the same body. This configuration has a G1/8 (BSPP) port, a metal bowl with a manual drain, the low-pressure regulator type, an external round pressure gauge scaled in psi, and a reverse-flow check valve (code K). A mounting bracket is included.
This is a genuine AirTAC part. The GFR series is made in sizes 200, 300, 400 and 600 with ports from 1/8 to 1 inch, and options include automatic or differential-pressure drains, a 5 um filter element (code W), embedded square or external round gauges with MPa, psi or bar scales, and NPT or G threads alongside the PT standard. Flow is published as curves rather than a single rating, so ask us to confirm sizing and datasheet figures for your application.
| Model | GFR200C06MLC2GK AirTAC Filter Regulator G1/8, Low-Pressure |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Fixture circuits that clamp workpieces at a low regulated setting get filtered air and stable low-pressure regulation from this unit, with the fitted check valve protecting the circuit against reverse flow at the inlet.
Nip and idler rollers on converting lines run on gentle, precisely set air pressure; this low-pressure filter regulator conditions the supply and lets operators dial in the soft setting those rollers need.
Packaging conveyors that use low-pressure air to hold or guide lightweight cartons and film get filtered, regulated air from this unit, with the manual drain suiting a shift-end bowl check.
The first choice is size: 200 is the smallest GFR frame, and each step up (300, 400, 600) brings a larger port and more flow, so match the frame to the air demand of the circuit - we can check the published flow curves against your consumption before you order. This unit is the low-pressure regulator type; its exact adjustment range is not in the published data we hold, so confirm it with us if your set pressure is critical. Drain is manual (code M): the bowl is emptied by hand, which suits installations where an automatic or differential-pressure drain is not wanted. Filtration is the 40 um standard element; specify W for 5 um if downstream equipment needs finer particle removal. The gauge here is an external round type scaled in psi; embedded square gauges and MPa or bar scales are alternatives. Thread is G (BSPP); PT is the AirTAC standard and NPT can be ordered. A mounting bracket is included.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves, not as a single rated figure, so we do not quote a number here. Send us your line pressure, set pressure and air consumption and we will confirm from the datasheet whether the GFR200 in G1/8 covers your demand.
The L code makes this a low-pressure regulator, intended for circuits set below the standard regulator range; the exact adjustment range is not in the published data, so confirm it with us. The M code means the bowl is drained by hand rather than by an automatic or differential-pressure drain.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.