The AirTAC GFR200C06MLC2K AirTAC Filter Regulator PT1/8 Low-Pressure is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200C06MLC2K is a GFR200 filter regulator: one body that removes water and particulate from compressed air and regulates downstream pressure. This unit is built on 1/8 in PT threads and uses the low-pressure regulator type, intended for circuits that run below standard plant pressure (the exact adjustment range is not published, so we confirm it on request). Water is drained by hand through the manual drain, filtration is the 40 um standard element, a round external gauge reading in psi is fitted, and a reverse/check valve holds downstream pressure if the supply dips. A mounting bracket is included, the polycarbonate bowl suits the 200 frame (size 600 uses aluminium alloy), maximum inlet pressure is 1.0 MPa (145 psi), and the operating temperature range is -5 to 70 C (non-freezing).
This is a genuine AirTAC part from the GFR series, which spans sizes 200 to 600 with ports from 1/8 to 1 in. Across the series you can order automatic or differential-pressure drains, a 5 um element (code W), gauges scaled in MPa, psi or bar, G (BSPP) or NPT threads in place of the PT standard, and units with or without the check valve. Flow is published as curves rather than a single rated figure, so send us your application and we will confirm the sizing and datasheet figures before you order.
| Model | GFR200C06MLC2K AirTAC Filter Regulator PT1/8 Low-Pressure |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Feeds filtered, regulated air to the cylinders that open cartons and place product on a packaging conveyor; the manual drain lets the line operator bleed accumulated water at shift start, and the psi gauge gives a direct pressure readout at the station.
Supplies the clamp cylinders on a milling or drilling fixture, where the low-pressure regulator type suits a gentler clamp circuit and the fitted check valve holds the downstream side if supply pressure dips mid-cut.
Runs a blow-off nozzle or air knife that clears dust and chips between assembly steps, with the 40 um element stopping particulate from reaching the nozzle and the manual drain keeping the bowl clear during housekeeping rounds.
Start with the port step: the GFR200 frame with 1/8 in PT ports sits at the small end of the GFR range (200/300/400/600), so step up a size if your circuit will carry more air - we will check the flow curves against your demand before you order, since AirTAC publishes flow as curves rather than one rated number. Then set the options this code carries: manual drain (simple hand bleeding; automatic and differential-pressure drains are available if no operator is on hand), the 40 um standard element (order the W code for 5 um), the low-pressure regulator type (ask us to confirm its adjustment range, which is not published), a round gauge scaled in psi (the embedded square gauge and MPa or bar scales are the alternatives), the fitted reverse/check valve, and the included bracket. PT is the standard thread; G (BSPP) and NPT are order options.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves, not as a single rated number, so we do not quote a l/min or SCFM figure here. Send us your operating pressure and air demand and we will confirm the sizing from the datasheet before you order.
The M in this code means the bowl drains by hand: an operator opens the drain to bleed off collected water. If nobody is at the machine regularly, the same GFR200 frame can be ordered with an automatic drain (code A) or the default differential-pressure drain instead.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.