The AirTAC GFR200C06MLC2WG AirTAC Filter Regulator G1/8, 5 um is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR200C06MLC2WG is an AirTAC GFR200 filter regulator: one body that removes water and particulate from compressed air and regulates the downstream pressure. This configuration is built for a G1/8 (BSPP) port, carries the finer 5 um filter element, drains by hand through its manual drain, and is the low-pressure regulator type. A metal bowl collects the condensate and a round psi gauge is fitted, so the set pressure is readable at the unit.
It is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with ports from 1/8 to 1 in, and published options include drain type, 40 um or 5 um filtration, gauge style and scale, PT/G/NPT threads and bracket choices. Maximum inlet pressure is 1.0 MPa (145 psi) and working temperature is -5 to 70 C, non-freezing. Flow is published as curves rather than a single rating, so ask us to confirm the datasheet and sizing for your application.
| Model | GFR200C06MLC2WG AirTAC Filter Regulator G1/8, 5 um |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Feeds clamp and hold-down cylinders on a CNC router or panel saw where workpieces must be held at reduced pressure to avoid crushing, with 5 um air and a readable psi setting at the fixture.
Supplies analyser enclosures, air bearings or test-rig actuators that need water- and particulate-free air regulated to a low setpoint, with the round psi gauge giving a local reading at the bench.
Powers the low-pressure seal and tuck arms on a carton-sealing machine, where the manual drain lets an operator bleed accumulated condensate at each shift start.
Size and port step up with air demand: this unit is size 200 with a 1/8 in G-thread port, the smallest published port in the range, so step to GFR300, 400 or 600 if your line draws more air. The 5 um element (code W) suits points of use that need cleaner air than the 40 um standard. The manual drain needs an operator to bleed the bowl, whereas automatic and differential-pressure drain versions handle condensate in service. This is the low-pressure regulator type with a round psi gauge fitted; an embedded square gauge and MPa or bar scales are the other published gauge choices. PT is the standard thread and G or NPT are order options, and a bracket is included. Flow is published as curves, not a single rating, so send us your flow and pressure conditions and we will confirm sizing from the datasheet before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes GFR flow as curves rather than a single rated figure, so we do not quote one number here. Send us your inlet pressure, set pressure and air demand and we will confirm the flow from the datasheet for this exact 1/8 in, 5 um, low-pressure configuration.
This unit drains by hand: an operator opens the drain to bleed collected water from the metal bowl. Choose manual where the machine is attended and condensate loads are light; choose the automatic or differential-pressure drain versions where the line runs unattended. We can quote the alternate drain code for the same size and port.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.