The AirTAC GFR200C06MLC3T AirTAC Filter Regulator NPT1/8 Low-Pressure is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200 series combines water and particulate filtration with pressure regulation in a single body. This GFR200C06MLC3T is the size 200 unit with a 1/8 in NPT port, a metal bowl with manual drain, a 40 um filter element, the low-pressure regulator type, and a round pressure gauge with bar scale fitted. It comes with a mounting bracket and no reverse/check valve.
This is a genuine AirTAC part. The GFR filter-regulator family spans sizes 200, 300, 400 and 600 with ports from 1/8 in to 1 in, and options including manual, automatic or differential-pressure drains, a 5 um element (code W) against the 40 um standard, embedded square or external round gauges with MPa, psi or bar scales, and PT, G or NPT threads. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing. Flow is published as curves rather than a single rating, so ask us to confirm sizing figures from the datasheet for your application.
| Model | GFR200C06MLC3T AirTAC Filter Regulator NPT1/8 Low-Pressure |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Set a stable low working pressure for spray guns and air-assisted applicators at a finishing line, with the 40 um element catching pipe scale and moisture before it reaches the fluid tip.
Feed small gripper and clamp cylinders on a carton packing conveyor, where the compact size 200 body and 1/8 in port suit short drops to individual actuators.
Regulate the air feeding pneumatic pilot circuits and control panels on a process skid, reading setpoints directly off the round bar-scale gauge.
The real choices on this family: step through sizes 200/300/400/600 for larger ports and more flow; pick the drain type (manual here, or automatic or differential-pressure); choose the 40 um standard element or the 5 um W option; select gauge style and scale (this unit carries the round gauge in bar, while the embedded square gauge is the standard fitting); and order the thread you need - PT is the standard, with G and NPT as catalogue options such as the NPT port on this unit. A mounting bracket is included on this configuration.
Flow for the G-series is published as curves, not a single rated figure, and the exact regulation range of the low-pressure type is not published in the sheet we work from. Send us your flow and pressure requirements and we will confirm suitability from the AirTAC datasheet before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes G-series flow as curves rather than a single rated figure, so we do not quote a number here. Send us your required flow and inlet/outlet pressures and we will confirm sizing from the datasheet on request.
This configuration uses a metal bowl with a manual drain: collected water is discharged by opening the drain valve as part of routine checks. If the unit will sit where regular access is awkward, the same series offers automatic and differential-pressure drains that remove that task - tell us and we will confirm the variant.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.