The AirTAC GFR200C06MLF1T AirTAC Filter Regulator NPT1/8 Low-Pressure is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR200C06MLF1T is an AirTAC GFR-series filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in a single body. This size-200 unit is built with a 1/8 in NPT port, a manual drain bowl you open by hand to expel collected condensate, a 40 um standard filter element, and an embedded square gauge scaled in MPa. It is the low-pressure type, it ships with a mounting bracket, and it carries no reverse (check) valve. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing.
This is a genuine AirTAC part from the GFR range, which spans sizes 200, 300, 400 and 600 with ports from 1/8 in up to 1 in, PT as the standard thread and G (BSPP) or NPT as order options, a choice of differential-pressure, automatic or manual drains, 40 um standard or 5 um (W) filtration, gauge scales in MPa, psi or bar, and optional brackets. Flow is published as curves rather than a single rated figure, so we confirm the datasheet and flow figures for your application on request.
| Model | GFR200C06MLF1T AirTAC Filter Regulator NPT1/8 Low-Pressure |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Feeding the clamp cylinders of a bench-top pneumatic press: the filter stage strips water and swarf from the shop air line before it reaches the valves, while the regulator holds a steady, low clamping pressure so parts are held consistently cycle after cycle. The manual drain suits a cell an operator visits each shift.
Conditioning the air feeding the grippers and suction ejectors on an assembly-cell pick-and-place station. Clean, regulated low-pressure air keeps gripper action repeatable, and the built-in MPa gauge lets a technician see supply pressure at a glance during changeover.
Supplying clean, adjustable low-pressure air to a laboratory or QA pneumatic test bench, where instruments and test fixtures need filtered air held at a stable, modest pressure. The square MPa gauge supports direct setting and verification of test pressure.
Start with the port step: size 200 with a 1/8 in (06) port suits compact point-of-use drops, while sizes 300, 400 and 600 step up in port and flow capacity - match the size to the air demand of the circuit rather than oversizing on price alone. Then choose the drain: this unit has a manual drain, which is right where an operator passes regularly; pick automatic or differential-pressure drain codes if the bowl cannot be drained by hand. Filtration is 40 um as standard; specify the W code for 5 um where finer protection is needed. Gauge scale is selectable (MPa, psi, bar) and an external round gauge is available where the embedded square gauge is hard to read. Thread is NPT on this code; PT is the standard and G (BSPP) is also an order option. A bracket is included on this code; J codes omit it.
One honest note on sizing: AirTAC publishes flow for this series as curves, not as a single rated number, so we do not quote a flow figure here. Send us your application details and we will confirm the correct size and the flow curves from the datasheet before you order. The adjustment range of the low-pressure type is likewise confirmed from the datasheet on request.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as performance curves rather than a single rated figure, so we do not quote a l/min, m3/h or SCFM number here. Tell us your application and operating pressure and we will confirm the flow curves and the sizing from the datasheet on request before you order.
The M in the code specifies a manual drain: condensate collecting in the bowl is released by opening the drain valve by hand. It is the right choice where someone attends the unit regularly. If the installation is unattended, ask us about the automatic (A) or differential-pressure (blank) drain versions of the same size.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.