The AirTAC GFR200C06MLF1TK AirTAC Filter Regulator 1/8 in NPT is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR200C06MLF1TK is an AirTAC GFR-series filter regulator: water and particulate filtration plus pressure regulation combined in a single body. This size 200 unit carries a 1/8 in NPT port, a manual drain on the polycarbonate bowl (size 200 bowls are PC; only size 600 uses aluminium alloy), and the standard 40 um filter element. The regulator is the low-pressure type, and the embedded square gauge reads in MPa. A reverse/check valve is fitted and a mounting bracket is included. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with ports from 1/8 to 1 in, and options include a 5 um element (code W), automatic or differential-pressure draining, gauge scales in psi or bar, an external round gauge, and G (BSPP) or NPT threads in place of the PT standard. Flow is published as curves rather than a single rating, so ask us to confirm the datasheet figures for your application.
| Model | GFR200C06MLF1TK AirTAC Filter Regulator 1/8 in NPT |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Point-of-use filtration and low-pressure regulation for bench-top test rigs and lab automation fed from a shop-air drop, with the manual drain emptied as part of the start-of-shift routine.
Conditioning air to a small pneumatic clamp or assembly fixture, where the 40 um element protects the downstream valve train and the low-pressure regulator holds a gentle set-point.
Supplying clean, regulated pilot air to solenoid valves and positioners on a process skid, with the fitted check valve blocking backflow toward the supply side.
The GFR family steps through sizes 200, 300, 400 and 600 with ports from 1/8 to 1 in, so start from the flow your line needs and move up a size if the port or body looks small - we can check the published flow curves against your demand before you order. On this unit the choices are already set: manual drain (simple and visible - choose automatic where the bowl is hard to reach), the standard 40 um element (5 um available as code W for finer filtration), a square gauge scaled in MPa (psi or bar scales and an external round gauge are options), NPT thread (G/BSPP or PT also available), and an included mounting bracket. As the low-pressure regulator type, its set-point range differs from the standard type - confirm the exact range with us before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes GFR flow as curves rather than a single rated figure, so we do not quote a number here. Send us your flow and pressure requirements and we will confirm the sizing against the datasheet before you order.
This unit has a manual drain: someone opens it to empty the water collected in the bowl. Choose the automatic-drain option when the bowl sits where it is hard to reach or the line runs unattended; differential-pressure draining is the catalogue default. The filter element is 40 um standard, with 5 um available as code W.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.