The AirTAC GFR200C06MLF2 AirTAC Filter Regulator PT1/8 Low-Pressure is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR200C06MLF2 is an AirTAC GFR200 filter regulator: one body that removes water and particulate from compressed air and regulates downstream pressure. This configuration is built for 1/8 in PT ports, uses the standard 40 um filter element, and drains by hand - you open the manual drain to release collected condensate. It is the low-pressure regulator type, the embedded square gauge is fitted with a psi scale, the bowl on this unit is the metal-bowl type, and a mounting bracket is included.
This is a genuine AirTAC part. The GFR family spans sizes 200 to 600 with ports from 1/8 in to 1 in, and options include automatic or manual draining, a 5 um element (code W), gauge scales in MPa, psi or bar, G or NPT threads, and bracket choices. It works at up to 1.0 MPa (145 psi) inlet pressure and -5 to 70 C (non-freezing). Rated flow is published as curves rather than a single figure, so ask us and we will confirm the datasheet numbers for your application.
| Model | GFR200C06MLF2 AirTAC Filter Regulator PT1/8 Low-Pressure |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
On a technical-college pneumatics bench, the unit filters the supply and holds a reduced, low-pressure setting for student-built circuits, with the psi gauge giving a familiar readout.
Labeling stations on a bottling line often run at reduced pressure; this filter regulator cleans the supply, holds the setting, and is drained by hand at the end of a shift.
Paint agitators and low-pressure air devices in a spray booth get filtered, regulated air at a low set pressure, with the manual drain opened during daily cleanup.
Choose the size and port step (200 through 600, 1/8 in to 1 in) against the air demand of your circuit. Decide the drain: manual as on this unit, or automatic or differential-pressure. Filter grade is 40 um standard; specify 5 um (code W) where finer filtration is needed. Gauge scale is psi here, with MPa and bar available, and the thread is PT as standard with G and NPT offered to order. This is the low-pressure regulator type; its exact adjustment range is not published as a single figure, so we confirm it on request. Because flow is published as curves rather than one rated number, send us your application and we will confirm sizing before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves, not as a single rated figure, so we do not quote a number here. Tell us your application and we will confirm the datasheet flow figures and check the sizing for you before you order.
This unit drains by hand: you open the drain to release collected condensate. Manual draining suits installations that are checked as part of a routine; if the unit sits where it cannot be reached often, the automatic or differential-pressure drain options remove that task. On this model the manual drain is paired with the low-pressure regulator type and the standard 40 um element.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.