The AirTAC GFR200C06MLF2G AirTAC Filter Regulator G1/8, Low-Pressure is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR200C06MLF2G is an AirTAC GFR-series filter regulator: filtration and pressure regulation combined in one body, so the air is first stripped of water and particulate and then passed to the regulator section. This size 200 unit sits on a G1/8 (BSPP) port, carries the low-pressure regulator type, a 40 um filter element and a manual-drain bowl, and comes with the embedded square gauge scaled in psi plus a mounting bracket.
It is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with ports from 1/8 to 1 inch, and options that include automatic or differential-pressure draining, a 5 um element (code W), gauge scales in MPa, psi or bar, and PT, G or NPT threads. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing. Because flow is published as curves rather than a single rating, we confirm the datasheet figures for your application on request.
| Model | GFR200C06MLF2G AirTAC Filter Regulator G1/8, Low-Pressure |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Filtering and regulating the branch that feeds spray guns on a finishing line, where the manual-drain bowl is bled by the operator at the end of each shift.
Conditioning the air feed to low-pressure actuators on a carton-sealing or wrapping machine, with the square psi gauge giving operators a local setpoint readout.
Regulating bench air for test rigs and lab apparatus that run off the shop air main, with the 40 um element catching pipe scale and the bracket allowing panel mounting.
Choose the size by the port and flow step: size 200 with a G1/8 port is the entry point of the GFR range, and stepping up to 300, 400 or 600 raises both the port and the flow capacity - we can check the published flow curves against your demand before you order. Drain choice matters: this model has a manual drain, which suits attended points where an operator can bleed the bowl; automatic or differential-pressure drains are the alternatives for unattended installations. The 40 um element is standard and the W code gives 5 um where finer filtration is needed. The fitted square gauge reads in psi, with MPa and bar scales and an external round gauge available. G (BSPP) is the thread on this unit, with PT and NPT offered to order, and the mounting bracket is included. Ask us to confirm sizing against the flow curves before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes GFR flow as curves rather than a single rated figure, so we do not quote a number here. Send us your line pressure and air demand and we will confirm the datasheet flow figures for the GFR200C06MLF2G on request.
The M in the code sets a manual drain: accumulated water is bled from the bowl by hand, which suits attended stations; automatic and differential-pressure drains are available for unattended points. The L code marks the low-pressure regulator type; the exact adjustment range for this variant is not published, so we confirm it on request.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.