The AirTAC GFR200C06MLF2TK AirTAC Filter Regulator NPT1/8 Low-Pressure is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR200C06MLF2TK is an AirTAC GFR-series filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in a single body. This 200-size unit is threaded 1/8 in NPT, carries a 40 um filter element, and drains condensate by hand through its manual drain. The regulator is the low-pressure type, and the unit includes an embedded square gauge reading in psi, a reverse/check valve, a polycarbonate (PC) bowl and a mounting bracket. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing.
This is a genuine AirTAC part. The GFR family spans 200, 300, 400 and 600 sizes with ports from 1/8 to 1 in, and options including manual, automatic or differential-pressure drains, a 5 um element (code W), gauge scales in MPa or bar as well as psi, and G (BSPP) or NPT threads in place of the PT standard. Flow is published as curves rather than a single rating, so ask us to confirm sizing and full datasheet figures for your application.
| Model | GFR200C06MLF2TK AirTAC Filter Regulator NPT1/8 Low-Pressure |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Point-of-use air preparation for paint spray guns in a coating booth: the 40 um element strips water and particles before the gun while the low-pressure regulator holds a gentle, stable setting suited to finishing work, with the psi gauge giving a direct local reading.
Clean, low-pressure regulated air for pneumatic test fixtures and lab benches, where the embedded square psi gauge supports direct observation and the fitted reverse/check valve prevents backflow through the unit into the supply line.
A compact filter regulator for low-pressure actuator circuits on a packaging line: filtration and regulation in one body saves panel space, and the manual drain lets an operator clear condensate during scheduled changeover.
Every choice in this code is decodable: the 200 size takes a 1/8 in port, and stepping up through 300, 400 and 600 gives larger ports and more flow, so match the size to the air demand of your circuit. Drain type matters - this unit is manual (operator drains by hand), while automatic and differential-pressure variants suit unmanned installations. Filter grade is 40 um standard; choose the W code for a 5 um element where finer filtration is needed. The gauge here is the embedded square type with a psi scale; MPa and bar scales are available. Thread is NPT on this unit; PT is the standard and G (BSPP) is an order option. The regulator is the low-pressure type, and its exact adjustment range is not published in our sheet, so confirm it with us. Flow is published as curves, not a single rating, so ask us to check sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves, not as a single rated figure, so we do not quote a number here. Send us your application details and we will confirm the flow and the full datasheet figures for this exact unit on request.
This configuration drains condensate by hand: an operator opens the drain when needed. The same GFR family is also available with automatic or differential-pressure drains, so if unmanned draining suits your installation better, ask us for those variants in the size you need.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.