The AirTAC GFR200C06MLF2W AirTAC Filter Regulator 1/8 in PT, 5 um is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR200C06MLF2W is an AirTAC GFR-series filter regulator: water and particulate filtration plus pressure regulation combined in one body, with a drain bowl but no lubricator. This size 200 unit is threaded PT 1/8 in, carries the 5 um filter element (code W, against the 40 um standard), drains by hand through its manual drain, and has the low-pressure type regulator with an embedded square gauge reading in psi. A mounting bracket is included and no reverse/check valve is fitted. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing.
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with ports from 1/8 to 1 in, a choice of differential-pressure, automatic or manual drains, 40 um or 5 um elements, gauge scales in MPa, psi or bar, and PT, G or NPT threads. Flow is published as curves rather than a single rating, and the adjustment range of this low-pressure type regulator is not listed as a single figure, so ask us to confirm both from the datasheet on request.
| Model | GFR200C06MLF2W AirTAC Filter Regulator 1/8 in PT, 5 um |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Point-of-use air preparation for a machine circuit running actuators at reduced set pressures: the low-pressure type regulator trims the supply while the 5 um element protects downstream directional valves from water and particulate.
Filtered, regulated air for a lab test rig where instruments and small cylinders need clean air at a low, stable setting, with the psi gauge giving a direct readout and the manual drain suiting supervised, routine operation.
Air preparation for a bench-mounted pneumatic press or clamp fixture: water and particulate are removed ahead of the regulator so the cylinder sees clean, settled pressure stroke after stroke, with the bracket mounting the unit at the machine.
Size and port step up together across the GFR range - 200 through 600, ports 1/8 in to 1 in - so choose the size whose flow curve covers your air consumption rather than the port alone; we can check the curve against your application. Drain type matters: this unit drains manually (code M), which suits installations checked by an operator, while automatic or differential-pressure drains suit unattended duty. The 5 um element (W) is the right pick where the 40 um standard is too coarse for downstream components. The gauge here is the embedded square type reading in psi; MPa or bar scales are available. Thread is PT as standard, with G (BSPP) and NPT as order options, and the mounting bracket is included. The regulator is the low-pressure type - its exact adjustment range is not published here, so confirm it with us before ordering. The bowl at this size is polycarbonate (PC); only the 600 size uses aluminium alloy.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes GFR flow as curves rather than a single rated figure, so no flow number is quoted here. Send us your application details and we will confirm the flow from the datasheet and check the size 200, 1/8 in port against your air consumption before you order.
Code M means the bowl is drained by hand, which suits installations where an operator checks the unit routinely; the GFR family is also offered with automatic or differential-pressure drains for unattended duty. This unit carries the 5 um element instead of the 40 um standard, an embedded square psi gauge, and the low-pressure type regulator, whose adjustment range we confirm on request.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.