The AirTAC GFR200C06MLF2WGK AirTAC Filter Regulator G1/8, 5 um is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200C06MLF2WGK is a filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in a single compact body. This 200-size unit is fitted with a G1/8 (BSPP) port, a fine 5 um filter element (code W), a manual drain on the metal bowl, and a low-pressure regulator type. It ships as configured with an embedded square gauge reading in psi, a reverse/check valve (code K), and a mounting bracket. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing.
This is a genuine AirTAC part from the GFR series, which spans sizes 200, 300, 400 and 600 with a choice of port sizes, G/NPT thread options, drain types, 40 um or 5 um filtration, gauge styles and scales. Flow for this series is published as curves rather than a single rated figure, so we confirm the exact flow and datasheet figures for your application on request.
| Model | GFR200C06MLF2WGK AirTAC Filter Regulator G1/8, 5 um |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Feeding pilot valves and clamping cylinders that must run below standard shop pressure, where the low-pressure regulator type and 5 um element keep actuation clean and stable.
Point-of-use filtration and regulation ahead of workholding fixtures, with the check valve holding downstream pressure if the main supply dips.
Supplying gated diverters and pusher cylinders at a set reduced pressure, with the 5 um element protecting small control valves from water and debris.
Choose the GFR200 size and its 1/8 in port when your line volume and piping match the smallest step of the GFR range; larger sizes (300/400/600) carry larger ports and higher flow capacity, which we confirm against the published curves before you order. This unit is already configured with the fine 5 um element instead of the standard 40 um, a manual drain instead of automatic or differential-pressure types, and a square gauge on the psi scale; if you need the 40 um grade, a different drain, or an MPa or bar scale, those are decodable options in the same series. Thread is G (BSPP) on this code, with PT as the catalogue standard and NPT available to order. Because flow is published as curves and not a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves, not as a single rated number, so we do not quote a figure here. Tell us your application and we will confirm the relevant flow and datasheet figures on request before you order.
The M in the code specifies a manual drain on the bowl, meaning accumulated condensate is drained by hand. The same GFR200 series is also available with automatic or differential-pressure drains, and with the standard 40 um element instead of the 5 um (W) fitted here - just ask for the alternative code.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.