The AirTAC GFR200C06MLF2WK AirTAC Filter Regulator PT1/8 5 um is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200C06MLF2WK is a size-200 filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in one body. This configuration is built for low-pressure circuits, with a fine 5 um filtering element (code W), a manual drain on the metal bowl, an embedded square gauge reading in psi, and a reverse/check valve fitted. The PT1/8 (1/8 in) port suits compact branch lines, individual actuators and small panels, and a mounting bracket is included. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing.
This is a genuine AirTAC part. The GFR family is available in sizes 200, 300, 400 and 600 with ports from 1/8 in to 1 in, a choice of manual, automatic or differential-pressure drains, 40 um standard or 5 um fine filtration, standard or low-pressure regulation, square or round gauges with MPa, psi or bar scales, and PT, G or NPT threads. Flow is published as curves rather than a single rating, so ask us to confirm sizing and datasheet figures for your application before ordering.
| Model | GFR200C06MLF2WK AirTAC Filter Regulator PT1/8 5 um |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Feeds and regulates air to workholding clamps that must close at a reduced, repeatable pressure; the 5 um element keeps fine contaminants out of the clamp cylinders and valve stack.
Conditions and steps down shop air at the gun whip line, where the low-pressure regulator type, fine 5 um filtration and a psi-reading gauge match typical coating-line practice.
Sits at the branch feeding small packaging-machine cylinders and air jets, holding a gentle regulated pressure while the manual drain and metal bowl handle condensate on a maintenance schedule.
Size 200 with a PT1/8 port is the entry step of the GFR range; step up to 300, 400 or 600 when the circuit needs a larger port and more flow. Because flow is published as curves and not as a single rated figure, send us your application details and we will confirm sizing against the datasheet before you order. This unit is the low-pressure (L) regulator type, chosen where the circuit works well below standard line pressure; its exact adjustment range is not published in the catalogue, so confirm the set pressure with us. The 5 um element (code W) suits finer air-quality needs than the 40 um standard element. The manual drain means the metal bowl is emptied by hand on a routine you set; automatic or differential-pressure drains are available on other variants if you prefer not to drain manually. The embedded square gauge here reads in psi; MPa or bar scales and an external round gauge are alternatives. Thread is PT as standard, with G and NPT available as order options, and a mounting bracket is included.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves, not as a single rated number, so we do not quote a rated flow figure. Send us your application - port size, downstream demand and working pressure - and we will confirm the sizing from the datasheet on request before you order.
The L code means the regulator is the low-pressure variant, intended for circuits working well below standard line pressure; its exact adjustment range is not published in the catalogue, so confirm your set pressure with us. The manual drain means the metal bowl is emptied by hand as part of routine maintenance; if you would rather not drain manually, ask about automatic or differential-pressure drain variants.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.