The AirTAC GFR200C06MLF3WT AirTAC Filter Regulator NPT1/8 Low-Pressure is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200C06MLF3WT is a filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in a single body. This 200-size unit is threaded NPT1/8 (1/8 in), carries a 5 um filter element (code W, against the 40 um standard), and has a metal bowl with a manual drain, so an operator bleeds collected condensate by hand. It is the low-pressure (L) regulator type, a square pressure gauge scaled in bar is fitted, a mounting bracket is included, and no reverse/check valve is fitted.
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with ports from 1/8 in to 1 in, and options for drain type, 40 um or 5 um filtration, gauge style and scale, PT/G/NPT thread and bracket. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing. Because flow is published as curves rather than a single rating, we confirm flow and other datasheet figures for your application on request.
| Model | GFR200C06MLF3WT AirTAC Filter Regulator NPT1/8 Low-Pressure |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Feeding clean, regulated low-pressure air to gripper cylinders and small actuators on assembly robotics, where the 5 um element helps protect seals and the square bar gauge gives operators a local set-point reading.
Supplying paint spray guns with filtered, pressure-regulated air at low set pressures, so water and grit do not spoil the finish and the regulator holds a steady atomising pressure at the gun.
Providing filtered, low-pressure air to bench-top test rigs and instrumentation, where manual draining suits intermittent use and the bar-scaled gauge supports repeatable test settings.
The real choices on this family: step through sizes 200/300/400/600 and ports 1/8 in to 1 in to match the air demand of your line - we confirm the exact flow against the published curves before you order. Drain type matters in service: manual (as here) needs someone to bleed the bowl, while automatic and differential-pressure drains look after themselves. Filter grade is 40 um standard or 5 um (W) where finer particulate protection is needed. Gauges come square or round with MPa, psi or bar scales; thread is PT as standard with G and NPT as order options; a bracket can be included or omitted (J). This unit is the low-pressure (L) type - its regulation range is not published as a single figure, so ask us to confirm it against your set pressure.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves rather than a single rated figure, so we do not quote a number here. Tell us your inlet pressure, set pressure and the air demand of your equipment, and we will confirm the flow from the datasheet for this exact model before you order.
It marks the low-pressure regulator type. Standard GFR units have a published adjustment range, but for this low-pressure version the exact range is not published as a single figure, so we confirm it against your set pressure on request. The rest of the code reads: 200 size, NPT1/8 port, manual drain, square gauge scaled in bar, 5 um filter element, NPT thread.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.