The AirTAC GFR200C06MLJC2G AirTAC Filter Regulator G1/8 Low-Pressure is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200C06MLJC2G is a size-200 filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in one body. This configuration carries a G1/8 (BSPP) port, a 40 um standard filter element, a manual drain bowl in polycarbonate, and the low-pressure regulator type. A round pressure gauge with a psi scale is fitted, and the unit is supplied without a mounting bracket. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with a choice of ports and threads, drain types (manual, automatic or differential-pressure), 40 um or 5 um filtration, gauge styles and scales, and bracket options. Flow is published as curves rather than a single rating, so ask us to confirm the datasheet and sizing figures for your application on request.
| Model | GFR200C06MLJC2G AirTAC Filter Regulator G1/8 Low-Pressure |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Compact pneumatic grippers and small cylinders on an electronics assembly head need clean, moisture-free air held at a modest, stable setting. This size-200 filter regulator with its 40 um element and low-pressure regulation conditions the supply right at the machine, and the psi round gauge lets the operator read the set point directly.
Paint and coating lines run their atomizing air at deliberately low pressures, where a standard regulator is hard to set finely. The low-pressure regulator type in this GFR200, fed through the 40 um filter to keep the air dry and particle-free, gives the booth operator a dedicated conditioning point with a psi gauge at the station.
Workholding clamps on machining fixtures often call for a lower holding pressure than the main shop air line delivers. Tapping a filtered, regulated take-off from this GFR200C06MLJC2G at the fixture protects the clamping circuit from water and debris and lets the setter dial in the clamp pressure, with the manual drain emptied during routine checks.
Start with the size and port: 200 is the smallest G-series step, and the G1/8 port here suits compact circuits - step up to 300/400/600 if your line needs more flow. Choose the drain to match maintenance: this unit is manual drain (drain the bowl by hand), while automatic and differential-pressure drains are available on other codes. Filtration is 40 um standard; specify the W code if you need 5 um. The fitted round gauge reads in psi; embedded square gauges and MPa/bar scales are the alternatives. Thread is G (BSPP) here - PT is the standard thread, with G and NPT as order options - and brackets are optional (this code is without one). Because flow is published as curves rather than a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves, not as a single rated figure, so we do not quote a flow number for this unit. Tell us your application and we will confirm the flow and sizing figures from the datasheet on request before you order.
The L code selects the low-pressure regulator type, intended for circuits that run at lower set pressures than the standard type is tuned for; the exact adjustment range for this variant is not published, so we confirm it on request. The M code selects the manual drain: condensate collects in the polycarbonate bowl and is emptied by hand, which suits installations checked as part of a regular maintenance routine. Automatic or differential-pressure drains are available on other GFR codes.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.