The AirTAC GFR200C06MLJC2K AirTAC Filter Regulator PT1/8 Low-Pressure is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200C06MLJC2K is a low-pressure filter regulator: one body that removes water and particulate from compressed air through a 40 um element and holds a downstream pressure setting. This 200-size unit has a PT1/8 (1/8 in) port, a metal bowl with a manual drain, a round gauge reading in psi, and a reverse (check) valve fitted, and it is supplied without a mounting bracket. It handles a maximum inlet pressure of 1.0 MPa (145 psi) at -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The GFR series spans sizes 200, 300, 400 and 600 with ports from 1/8 in to 1 in, and options for thread (PT standard; G and NPT to order), drain type, filter grade (40 um standard, 5 um with code W) and gauge scale. Flow is published as curves rather than a single rating, so ask us to confirm the datasheet figures for your application.
| Model | GFR200C06MLJC2K AirTAC Filter Regulator PT1/8 Low-Pressure |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Filtering shop air and holding a gentle, repeatable pressure to spray guns and air-assisted applicators in a finishing booth, with the 40 um element protecting the fluid tips.
Conditioning air for small cylinders and grippers on a carton-sealing conveyor, with the reverse valve helping hold the downstream circuit if the main supply dips.
Delivering clean, regulated low-pressure air to bench-top analytical instruments and pneumatic sample-handling fixtures in a laboratory or QA station.
Step up through the sizes - 200 here with its PT1/8 port, then 300, 400 and 600 with larger ports - as your air demand grows. Drain choice matters: this unit has a manual drain, so bleed the bowl as part of routine checks; automatic or differential-pressure drain versions suit unattended installs. The element is the 40 um standard grade (5 um is available as code W). The round gauge on this code reads in psi; the embedded square gauge with MPa or bar scales is the alternative. Thread is PT as standard, with G (BSPP) and NPT as order options, and the J code means no mounting bracket is included - pick a code without the J if you need one. Because flow is published as curves rather than a single rated figure, send us your application details and we will confirm sizing against the datasheet before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
Flow for the GFR200 series is published as curves, not as a single rated figure, so we do not quote a number here. Send us your working pressure and the air demand of your equipment, and we will confirm the sizing against the AirTAC datasheet on request.
The M in the code means the bowl has a manual drain: open it periodically to expel collected water and contaminants. If the installation runs unattended, ask us about the automatic (A) or differential-pressure (blank) drain versions of the same low-pressure filter regulator.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.