The AirTAC GFR200C06MLJC2TK AirTAC Filter Regulator NPT 1/8 in is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR200C06MLJC2TK is an AirTAC GFR-series filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in a single body. This size 200 unit has a 1/8 in NPT port, a metal bowl with manual drain, and the standard 40 um filter element. The regulator is the low-pressure type, and this configuration is fitted with a round gauge reading in psi plus a built-in reverse (check) valve; no mounting bracket is included. Maximum working (inlet) pressure is 1.0 MPa (145 psi) and the temperature range is -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with ports from 1/8 in to 1 in, and options across the family include automatic, manual or differential-pressure drains, a 5 um element (code W), embedded square or external round gauges with MPa, psi or bar scales, G or NPT threads, and mounting brackets. Flow is published as curves rather than a single rating, so ask us to confirm sizing and full datasheet figures for your application.
| Model | GFR200C06MLJC2TK AirTAC Filter Regulator NPT 1/8 in |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Clean, low-pressure regulated air to small clamp cylinders on a CNC fixture, with the built-in check valve in the air path and a manual drain bled at shift start to keep water out of the clamping circuit.
Point-of-use air preparation for sealing heads and small actuators on a packaging conveyor, where the 40 um element protects valves from particulate and the round psi gauge gives operators a clear local pressure readout.
Compact 1/8 in ported filtration and low-pressure regulation for laboratory rigs and test benches, where the manual drain suits intermittent use and the psi-scaled gauge supports repeatable setup.
Pick the size by port and demand: size 200 with a 1/8 in port suits compact circuits, while sizes 300, 400 and 600 step up in port and flow capacity - we can check the published flow curves against your requirement before you order. Drain type matters: this unit has a manual drain, which an operator opens to bleed collected water from the bowl; automatic and differential-pressure drains are available elsewhere in the family. The standard element is 40 um; specify code W for the 5 um grade where finer filtration is needed. On gauges, an embedded square gauge is standard and external round gauges come in MPa, psi or bar scales - this configuration carries a round psi gauge. Thread: PT is the standard, with G (BSPP) and NPT as order options, and this unit is supplied in NPT. Brackets are optional in the family; this unit has none. Note that the regulator is the low-pressure type - ask us to confirm its adjustment range, as it is not published in our data.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves, not as a single rated figure, so we do not quote a number here. Send us your application details and we will confirm the flow and the full datasheet figures for this exact unit on request.
This unit is the low-pressure (code L) version of the GFR200, and the exact adjustment range for the low-pressure type is not published in the data we hold, so we confirm it on request. What is fixed by specification: the maximum working (inlet) pressure is 1.0 MPa (145 psi), the temperature range is -5 to 70 C, and the unit carries a round gauge reading in psi.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.