The AirTAC GFR200C06MLJC2WGK AirTAC Filter Regulator G1/8 5 um is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200C06MLJC2WGK is a GFR200 filter regulator: it removes water and particulate from compressed air and holds a set downstream pressure, all in one body. This configuration carries a G1/8 (BSPP) port, a 5 um filter element (code W), a manual drain, the low-pressure regulator type, a round external gauge reading in psi, a reverse/check valve, and no mounting bracket. The bowl is metal. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing.
It is a genuine AirTAC part from the GFR filter-regulator family, which spans sizes 200, 300, 400 and 600 with port options from 1/8 to 1 inch, differential-pressure, automatic or manual drains, 40 um or 5 um filtration, and gauge scales in MPa, psi or bar. Flow is published as curves rather than a single rating, so ask us to confirm the datasheet figures for your application.
| Model | GFR200C06MLJC2WGK AirTAC Filter Regulator G1/8 5 um |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Feeding a small bench-top pneumatic press or clamping fixture: the 5 um element keeps scale and pipe debris out of the control valve, while the low-pressure regulator holds the gentle force setting the tooling needs.
Supplying air to laboratory analysers or test rigs that run at low pressure: filtered, regulated air with a local psi gauge lets a technician see and set the supply at the bench without touching the plant regulator.
Point-of-use supply for packaging conveyor stopper and pusher cylinders: water and particulate are stripped out before the directional valves, and the built-in check valve blocks backflow from the downstream side.
Within the GFR family you choose size and port against the air demand of the machine: size 200 with a 1/8 in port here suits compact branches, while the 300, 400 and 600 steps raise port size and body for larger lines. Drain type is a real decision: this unit is manual, so an operator drains the bowl; automatic and differential-pressure drains are available in the family for points that are not checked daily. Filtration is 5 um on this unit (40 um is the standard grade) - choose 5 um where downstream valves and instruments need finer air. The gauge is the external round type on a psi scale; the embedded square gauge and MPa or bar scales are the other options. Thread is G (BSPP) here; PT is the standard thread and NPT is also an order option. No mounting bracket is fitted; brackets are optional. The regulator is the low-pressure type, and because flow is published as curves rather than a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes GFR flow as curves, not as a single rated number, so we do not quote a figure here. Send us your line pressure and air demand and we will confirm the flow curve and sizing for the GFR200C06MLJC2WGK from the datasheet on request.
This unit has a manual drain: an operator opens it to release the water collected in the bowl. The GFR family also offers automatic and differential-pressure drains for points that are not checked daily. Filter grade is the other key choice: 40 um is the standard element, and the 5 um element (code W) fitted here suits finer downstream needs.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.