The AirTAC GFR200C06MLJC2WT AirTAC Filter Regulator 1/8 in NPT is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR200C06MLJC2WT is an AirTAC GFR-series filter regulator: it removes water and particulate from compressed air and holds downstream pressure, both in one body. This 200-size unit is threaded 1/8 in NPT and is built as a low-pressure type for circuits that run below standard line pressure. It carries a 5 um filter element (the finer of the two catalogue grades), a manual drain on the metal bowl, a round pressure gauge reading in psi, and no mounting bracket.
This is a genuine AirTAC part. The GFR family spans 200, 300, 400 and 600 sizes with ports from 1/8 in to 1 in, a choice of PT, G or NPT thread, manual, automatic or differential-pressure draining, 40 um or 5 um filtration, and gauge or no-gauge builds. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing. Because flow is published as curves rather than a single rating, we confirm the datasheet figures for your application on request.
| Model | GFR200C06MLJC2WT AirTAC Filter Regulator 1/8 in NPT |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Supplying filtered, regulated pilot air to pneumatically actuated control valves on a plant skid, where the low-pressure type matches a pilot circuit that runs below standard line pressure.
Point-of-use conditioning on a laboratory compressed-air drop feeding sensitive instruments, where the 5 um element strips fine particulate ahead of the equipment.
Conditioning the air to clamp and hold-down cylinders on a carton-sealing conveyor, with the manual drain opened during scheduled shift changeovers.
The decodable choices on this family are: size and port (200 here, 1/8 in NPT) stepped against the flow your line needs; drain type (this unit is manual, so collected water is emptied by hand, while automatic and differential-pressure versions drain without attention); filter grade (5 um fitted here, 40 um standard elsewhere); gauge type and scale (this build has a round gauge in psi, while an embedded square gauge in MPa, psi or bar is the other route); thread (PT is the standard, with G and NPT as order options); and bracket (not fitted here). As a low-pressure type, its regulation range differs from the standard build and is not published as a single figure, so ask us to confirm it. Flow is published as curves, not a rated number, so send us your flow and pressure conditions and we will confirm sizing against the application before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves rather than a single rated figure, so we do not quote a number here. Send us your required flow and working pressure and we will confirm the datasheet curve for the GFR200 size against your application before you order.
This build has a manual drain: someone opens the drain valve to expel the water collected in the bowl. If the unit sits where regular access is awkward, the automatic or differential-pressure drain versions of the same GFR200 size drain themselves - we can quote those variants.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.