The AirTAC GFR200C06MLJC2WTK AirTAC Filter Regulator NPT1/8 is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR200C06MLJC2WTK is an AirTAC GFR-series filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in one body. This configuration is the 200 size with a 1/8 in NPT port, a 5 um filter element (W grade), a manual drain, the low-pressure regulation type, a built-in check valve, and a round gauge reading in psi fitted. The bowl is metal, and no mounting bracket is included with this code.
This is a genuine AirTAC part. The GFR family spans 200, 300, 400 and 600 sizes with ports from 1/8 in to 1 in, and options across drain type, 40 um or 5 um filtration, gauge style and scale, PT/G/NPT threads, brackets and check valves. Flow is published as curves rather than a single rating, so ask us to confirm sizing and any datasheet figure for your application before ordering.
| Model | GFR200C06MLJC2WTK AirTAC Filter Regulator NPT1/8 |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Feeding filtered, regulated air to the clamping cylinders of a small pneumatic press: the 5 um element protects downstream valve seals, and the built-in check valve blocks backflow through the unit when supply pressure is lost.
Conditioning the supply on a laboratory air distribution line running instruments at reduced pressure, where the low-pressure regulation type and the fitted round psi gauge give a local, readable setpoint well below standard line pressure.
Supplying pick-and-place cylinders and air chucks on an electronics assembly cell: the manual drain is emptied at shift start, the psi gauge gives operators a local pressure readout, and the 5 um element suits sensitive actuator circuits.
Start with the size step: 200 is the smallest GFR frame and carries a 1/8 in port here; the 300, 400 and 600 frames take larger ports and move more air, so match the frame to the demand of the circuit rather than upsizing blindly. Drain type is a real choice: this unit has a manual drain you empty by hand, while automatic and differential-pressure drains suit installations nobody visits regularly. Filtration here is the finer 5 um W element; the 40 um standard element is the economical choice for general lines that do not need fine protection. The fitted round gauge reads in psi, with MPa and bar scales available as alternatives, and the built-in check valve blocks backflow through the unit. Thread is NPT on this code (PT is the standard, G/BSPP is an order option), and it comes without a mounting bracket. Because flow is published as curves and not a single rating, send us your air demand and we will confirm sizing against the datasheet before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes GFR-series flow as curves rather than a single rated figure, so we do not quote a number here. Tell us your air demand and we will confirm the flow for this 200-size, 1/8 in NPT unit from the datasheet on request before you order.
The L in the code makes this a low-pressure regulation type, and the exact adjustment range for that type is not published in the sheet we work from, so we will not guess it. Ask us to confirm the range on request; the unit's maximum inlet pressure is 1.0 MPa (145 psi).
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.