The AirTAC GFR200C06MLJC3TK AirTAC Filter Regulator 1/8 in NPT is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR200C06MLJC3TK is an AirTAC GFR-series filter regulator: water and particulate filtration plus pressure regulation combined in a single body, with a drain bowl and no lubricator. This 200-size unit is configured with a 1/8 in NPT port, the low-pressure regulator type, a manual drain, the standard 40 um filter element, a metal bowl, a fitted round gauge with bar scale, an integrated reverse/check valve, and no mounting bracket. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with port sizes from 1/8 in up to 1 in, and is orderable with manual, automatic or differential-pressure drains, a 5 um element (code W), square or round gauges with MPa, psi or bar scales, G (BSPP) or NPT threads in place of the PT standard, and bracket options. Flow is published as curves rather than a single rating, so ask us to confirm the datasheet figures for your application.
| Model | GFR200C06MLJC3TK AirTAC Filter Regulator 1/8 in NPT |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
On a bench press or clamping fixture that holds workpieces at reduced air pressure, this filter regulator cleans the supply and holds the set pressure at the cylinder, with the check valve helping hold the circuit if upstream supply dips.
Dispensing lines for adhesives and sealants often run at low regulated pressure to avoid over-application; this unit filters water and particles from the shop air ahead of the dispenser and lets an operator set the low working pressure with the bar-scale gauge.
Blow-off nozzles that clear dust and crumbs from product or belting need clean, steady, low-pressure air; this filter regulator conditions the line and the manual drain lets maintenance purge accumulated condensate during shift checks.
Start with the port step: this unit is the 200 size with a 1/8 in NPT port; larger GFR sizes (300/400/600) step up to 1/4 in through 1 in for higher air demand. Drain choice matters: manual drain means someone opens the bowl drain periodically, while automatic and differential-pressure drains discharge condensate without that routine. The standard element is 40 um; specify code W for the 5 um grade where finer particulate removal is needed. Gauges are available as the embedded square type or an external round gauge, in MPa, psi or bar scales - this unit carries the round, bar-scale gauge. Threads can be ordered as PT (standard), G (BSPP) or NPT, and a bracket can be added if panel or surface mounting is required. Because flow is published as curves rather than a single rated figure, send us your application details and we will confirm sizing against the datasheet before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves, not as a single rated number, so we do not quote a l/min, m3/h or SCFM figure. Send us your application details and we will confirm the flow and datasheet figures for this 200-size, 1/8 in NPT unit on request.
This configuration carries code M, a manual drain: condensate collected in the bowl is released by opening the drain at the bottom, which suits installations checked as part of a maintenance routine. The same GFR200 body is also orderable with an automatic drain (code A) or the differential-pressure drain (blank), which discharges condensate without manual attention.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.