The AirTAC GFR200C06MLJC3WT AirTAC Filter Regulator NPT1/8 Low-Pressure is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR200C06MLJC3WT is an AirTAC GFR-series filter regulator: water and particulate removal plus pressure regulation combined in a single body. This configuration is the 200 size with a 1/8 in NPT port, a 5 um filter element (the W grade, finer than the 40 um standard), a manual drain, and the low-pressure regulator type. It carries the external round gauge reading in bar, and no mounting bracket. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing. The exact adjustment range of the low-pressure type is not published in the material we hold, so we confirm it on request.
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with ports from 1/8 in to 1 in, and options for thread (PT standard, G and NPT to order), drain type (differential-pressure, automatic or manual), filter grade (40 um standard, 5 um with the W code) and gauge scale (MPa, psi or bar). Flow and other datasheet figures are published as curves rather than a single rating, so we confirm them on request for your application.
| Model | GFR200C06MLJC3WT AirTAC Filter Regulator NPT1/8 Low-Pressure |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Clamp cylinders on assembly fixtures that handle delicate or finished parts run at reduced working pressure. This unit conditions the supply with 5 um filtration and lets a technician set and watch the working pressure on the round bar gauge at the fixture drop.
Laboratory and pilot-scale pneumatic test benches need clean, regulated air at modest pressures. The manual drain lets the operator bleed the bowl at the start of each shift, and the compact 200 size with no bracket suits direct mounting at the bench panel.
Sealing, tucking and folding stations on packaging lines run their actuators at low regulated pressure to avoid crushing product. A filter regulator mounted at the machine drop keeps water and fine dirt out of the valve train while the operator sets the line pressure locally.
Start with the size and port step: GFR units run from size 200 to 600 with ports from 1/8 in to 1 in, and the right step depends on the air demand of the circuit. Flow is published as curves rather than a single rating, so ask us to confirm sizing against your application before ordering. Then pick the drain: differential-pressure (the default), automatic, or manual as fitted here, where the operator drains the bowl as part of routine checks. Pick the filter grade: 40 um standard or 5 um with the W code, as this unit carries. Gauge scale is selectable in MPa, psi or bar; this unit has the external round gauge in bar. Thread is PT as standard with G and NPT as order options (this unit is NPT), and a mounting bracket is optional and not fitted here.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR family as curves, not as a single rated figure, so we do not quote a number here. Tell us your port size, upstream pressure and the demand of the circuit, and we will confirm the flow figures from the datasheet for this exact model before you order.
The M in the code selects the manual drain: an operator opens the drain valve during routine checks instead of relying on an automatic mechanism. The W selects the 5 um element, one step finer than the 40 um standard, for circuits with sensitive valves or instruments. If unattended draining suits your site better, the same family is available with automatic or differential-pressure drains.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.