The AirTAC GFR200C06MLJC3WTK AirTAC Filter Regulator NPT1/8 is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR200C06MLJC3WTK is an AirTAC GFR-series filter regulator: water and particulate filtration plus pressure regulation combined in one body. This size 200 unit has a 1/8 in NPT port, a 5 um filter element (finer than the 40 um standard), a metal bowl with manual drain, and a low-pressure type regulator. A round gauge with bar scale is fitted, a reverse/check valve is built in, and no mounting bracket is included. Maximum inlet pressure is 1.0 MPa (145 psi); operating temperature is -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The GFR family spans sizes 200 to 600 with ports from 1/8 to 1 in, and options include manual, automatic or differential-pressure drains, 40 um or 5 um filtration, embedded square or external round gauges with MPa, psi or bar scales, PT, G or NPT threads, a bracket, and standard or low-pressure regulation. Flow is published as curves rather than a single rating, so we confirm flow and other datasheet figures on request.
| Model | GFR200C06MLJC3WTK AirTAC Filter Regulator NPT1/8 |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Feeding regulated air to clamping fixtures on a small assembly bench: the 5 um element protects downstream valves from particles and water, the low-pressure regulator is set to the fixture's working pressure, and the bar gauge shows the setpoint at a glance.
Supplying clean, regulated air to bench test rigs and pneumatic instrumentation where only a low supply pressure is wanted; the built-in check valve holds the setting if upstream air dips, and the manual drain lets the operator bleed collected water after a run.
Point-of-use air prep for the small cylinders on a packaging conveyor's sealing or sorting station: the 1/8 in NPT port suits compact drop lines, the 5 um element keeps misting valves clean, and the manual drain is bled at shift start.
Because body size and port step together (200 through 600, 1/8 to 1 in), start by matching the size to the flow your line needs - and since AirTAC publishes flow as curves rather than a single rating, ask us to confirm the sizing against your application before ordering. From there the real choices are: drain type (manual here; automatic or differential-pressure are available if you would rather not bleed the bowl by hand), filter grade (40 um standard, 5 um as on this unit for finer protection), gauge type and scale (embedded square or external round, in MPa, psi or bar), thread (PT is the standard, G and NPT are order options - this unit is NPT), bracket or no bracket, and standard versus low-pressure regulation.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for this series as curves rather than a single rated figure, so we do not quote a number. Send us your application details and we will confirm the flow and sizing from the datasheet before you order.
This is the low-pressure type (code L), and its adjustment range is not published in the sheet we work from, so we do not state one. The maximum inlet pressure is 1.0 MPa (145 psi). Ask us and we will confirm the low-pressure adjustment range from the datasheet.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.