The AirTAC GFR200C06MLJF1T AirTAC Filter Regulator NPT1/8 Low-Pressure is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR200C06MLJF1T is an AirTAC GFR-series filter regulator: one body that removes water and particulate from compressed air and regulates downstream pressure. This 200-size unit is built with a 1/8 in NPT port, a manual drain for releasing collected condensate, a 40 um standard filter element, and an embedded square gauge scaled in MPa. It is the low-pressure type, intended for circuits that run below standard line pressure, with a maximum inlet pressure of 1.0 MPa (145 psi) and an operating range of -5 to 70 C, non-freezing.
This is a genuine AirTAC part. The GFR family spans 200, 300, 400 and 600 sizes with ports from 1/8 in to 1 in, PT, G and NPT thread options, manual, automatic or differential-pressure drains, a 5 um optional element, and gauge choices. Flow is published as curves rather than a single rating, so ask us to confirm sizing and datasheet figures for your application.
| Model | GFR200C06MLJF1T AirTAC Filter Regulator NPT1/8 Low-Pressure |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Feeding cleaned, pressure-controlled air to benchtop analytical instruments and sample-preparation stations where the line runs at reduced pressure and a compact 1/8 in connection is all that is needed.
Supplying filtered, regulated air to the small gating and reject cylinders on a bottling or canning conveyor, with the manual drain emptied during routine line checks.
Conditioning the air feeding low-pressure circuits on a carton-sealing or tray-forming machine, where the square MPa gauge gives operators a clear setpoint readout at the machine.
Size the unit by port and expected flow: 200 is the smallest GFR size, here with a 1/8 in NPT port; step up to 300, 400 or 600 when the application needs a larger port. Choose the drain deliberately: this model is manual drain, so someone opens the drain periodically; automatic or differential-pressure drain versions in the same family suit unattended installations. The 40 um element is standard and the 5 um grade is available as code W where finer filtration is needed. The embedded square MPa gauge is fitted; psi or bar scales and an external round gauge are options. Thread here is NPT, ordered as an option - PT is the standard and G (BSPP) is also available. This unit is supplied without a mounting bracket; bracketed versions exist. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes GFR flow as curves rather than a single rated figure, so we do not quote a number here. Send us your application details and we will confirm the flow and the full datasheet figures for the GFR200C06MLJF1T on request.
The M in the code means manual drain: condensate collected in the bowl is released by hand. It suits attended installations with regular checks. Automatic or differential-pressure drain versions are available in the same GFR family for lines that run unattended.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.