The AirTAC GFR200C06MLJF1WT AirTAC Filter Regulator NPT1/8 is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200C06MLJF1WT is a GFR-series filter regulator: it removes water and particulate from compressed air and holds downstream pressure steady, in a single body. This size 200 unit is built with a 1/8 in NPT port, a 5 um filter element (the finer W grade), a manual drain on the metal bowl, low-pressure regulation type, and an embedded square gauge reading in MPa. No reverse/check valve is fitted and no mounting bracket is included.
This is a genuine AirTAC part. The GFR range runs in sizes 200, 300, 400 and 600, with port threads PT (the standard) as well as G and NPT as catalogue options, a choice of differential-pressure, automatic or manual drains, 40 um standard or 5 um filtration, and gauge scales in MPa, psi or bar. Flow is published as curves rather than a single rating, so ask us to confirm datasheet figures for your application.
| Model | GFR200C06MLJF1WT AirTAC Filter Regulator NPT1/8 |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Feeds spray guns in a paint booth with water- and particle-free air held at a steady low setting, protecting finish quality on panels.
Supplies filtered, regulated air to the cylinder-driven sealing and filling heads on a packaging line, with the 5 um element guarding the pilot valves.
Sits at the inlet of a pneumatic control panel, cleaning the supply and holding a low, stable pressure to positioners and pilot valves.
Size and port set the air capacity: step up from 200 to 300, 400 or 600 for larger ports and more flow, matched to the demand of the equipment downstream. Drain type is a real choice on this family: manual (this model) means an operator opens the drain by hand, while automatic and differential-pressure drains discharge condensate without attention - choose manual where the bowl is checked routinely. The 5 um element (W) suits points of use needing finer cleanliness than the 40 um standard; the embedded square gauge reads MPa, with psi or bar scales available. Thread is NPT on this unit; PT is the standard and G is also offered. No mounting bracket is fitted on this code.
Flow for the G series is published as curves, not a single rated figure, so send us your application details and we will confirm sizing from the datasheet before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes GFR flow as curves, not a single rated figure, so we do not quote a number here. Send us your line pressure and the air demand of your equipment and we will confirm sizing from the datasheet on request.
The W-grade 5 um element is the finer option for points of use such as spray guns, instrument air and sensitive valves, while the 40 um standard element suits general upstream protection. This model is configured with 5 um filtration; 40 um versions of the same size exist in the GFR range.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.