The AirTAC GFR200C06MLJF2T AirTAC Filter Regulator NPT1/8 Low-Pressure is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR200C06MLJF2T is an AirTAC GFR200 filter regulator: one body that removes water and particulate from compressed air and regulates downstream pressure. This configuration has 1/8 in NPT ports, a 40 um standard filter element, a manual-drain polycarbonate bowl, a low-pressure regulator and an embedded square gauge reading in psi; no mounting bracket is fitted. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C (non-freezing).
It is a genuine AirTAC part from the G-series filter-regulator family, which spans sizes 200 to 600 with ports from 1/8 in to 1 in, plus drain, filter-grade, gauge and thread options to match the line. Because AirTAC publishes flow as curves rather than a single rating, we confirm flow and other datasheet figures for your application on request.
| Model | GFR200C06MLJF2T AirTAC Filter Regulator NPT1/8 Low-Pressure |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Filtered, regulated air at the drops feeding spray guns and air-assisted atomisation in a finishing booth, with the low-pressure regulator holding the reduced setting the guns are run at.
Supplies filtered, regulated air to the low-pressure cylinders and hold-down clamps on a bagging or carton-sealing machine, with the psi gauge giving operators a setpoint they can read at the machine.
Feeds bench-top test rigs and pneumatic instrumentation that run at reduced pressure, where the low-pressure regulator type and a clear gauge reading matter more than high flow.
Within the GFR family you step up size (200/300/400/600) and port (1/8 in to 1 in) to match the flow your line needs; since AirTAC publishes flow as curves rather than a single rating, ask us to check the curves against your application before ordering. Drain type is a real choice: this model is manual drain (condensate is drained by hand), while automatic and differential-pressure drains are available in the family. Filter grade is 40 um standard, with 5 um (code W) where finer filtration is required. The embedded square gauge is standard and this model reads in psi; MPa and bar scales and an external round gauge are options. Thread: PT is the standard, with G (BSPP) and NPT as order options - this model is NPT. This variant has no mounting bracket; brackets are optional in the family. The low-pressure regulator type suits circuits regulated below the standard range; its exact adjustment range is not published, so we confirm it from the datasheet on request.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves rather than a single rated figure, so we do not quote a number here. Send us your inlet pressure, regulated pressure and downstream demand and we will confirm the flow for this exact model from the datasheet on request.
This variant uses the low-pressure regulator type instead of the standard one, for circuits that are regulated below the standard range. AirTAC does not publish a single adjustment figure for this type, so we confirm the exact range from the datasheet on request. The rest of the configuration - 1/8 in NPT ports, manual drain, 40 um element and psi gauge - is unchanged.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.