The AirTAC GFR200C06MLJF2WK AirTAC Filter Regulator PT1/8, 5 um is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR200C06MLJF2WK is an AirTAC GFR-series filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in a single body. This 200-size unit has a PT1/8 port, a 5 um filter element (code W), a manual drain on a metal bowl, the low-pressure regulator type, an embedded square gauge scaled in psi, and a reverse/check valve fitted. No mounting bracket is included with this configuration.
This is a genuine AirTAC part. The GFR family is offered in sizes 200, 300, 400 and 600 with ports from 1/8 to 1 inch, a choice of differential-pressure, automatic or manual drain, 40 um standard or 5 um filtration, gauge and thread options, and standard or low-pressure regulation. Max inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing. Flow is published as curves rather than a single rating, so ask us to confirm sizing figures from the datasheet for your application.
| Model | GFR200C06MLJF2WK AirTAC Filter Regulator PT1/8, 5 um |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Point-of-use supply for a packaging machine's pneumatic actuators: the 5 um element strips water and particles before they reach sealing jaws and gripper cylinders, while the low-pressure regulator holds the circuit at the setting the machine was set up for, read directly on the psi-scaled square gauge.
A compact filter regulator mounted at a small assembly cell, feeding air cylinders and hand-held air tools from a 1/8 in drop. The reverse/check valve helps hold the downstream setting if supply pressure is interrupted, and the manual drain suits stations serviced on a fixed schedule.
Low-pressure pneumatic test rigs and lab benches where fine 5 um filtration protects sensitive instruments and the regulator is trimmed gradually while the operator watches the psi-scaled gauge. The 1/8 in port keeps the bench plumbing compact.
Size and port: 200 is the smallest GFR size; step up to 300, 400 or 600 when your flow demand outgrows the 1/8 in port. Drain: this unit is manual drain, so condensate in the bowl is emptied by hand during maintenance; automatic or differential-pressure drain versions are available if you want condensate handled without manual attention. Filtration: the fitted 5 um element (code W) suits finer air preparation; 40 um is the standard grade where coarser protection is enough. Gauge: the embedded square gauge on this unit reads in psi; MPa and bar scales and an external round gauge are options. Thread: PT is standard on this code; G (BSPP) and NPT versions can be ordered. No bracket is included; brackets are optional. Flow for this family is published as curves, not a single rated figure, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
Flow for the GFR series is published as curves rather than a single rated figure, so we do not quote a rated flow number for this unit. Tell us your application and line conditions and we will confirm the sizing from the AirTAC datasheet on request before you order.
Yes. M is the manual-drain code, so condensate collected in the bowl must be drained by hand. If you want condensate handled without manual attention, ask for the A (automatic) or differential-pressure drain version of the same GFR200 size; the rest of the configuration can be matched.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.