The AirTAC GFR200C06MLJF2WTK AirTAC Filter Regulator NPT1/8 is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR series combines water and particulate filtration with pressure regulation in a single body, so one compact unit both cleans the air and sets the working pressure at the point of use. This configuration is a 200-size unit on a 1/8 in NPT port, fitted with the finer 5 um filter element (code W), a manual drain for scheduled bowl blow-down, the low-pressure regulator type, an embedded square gauge reading in psi, and a reverse/check valve to hold the downstream setting if supply dips. No mounting bracket is included. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing.
This is a genuine AirTAC part. The GFR family runs from 200 to 600 size with ports from 1/8 to 1 in, a choice of manual, automatic or differential-pressure drain, 40 um standard or 5 um (W) filtration, gauge scales in MPa, psi or bar, and PT, G or NPT threads. Flow is published as curves rather than a single rating, so send us your application and we will confirm the figures from the datasheet on request.
| Model | GFR200C06MLJF2WTK AirTAC Filter Regulator NPT1/8 |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Small clamp cylinders on a bench press that must run at reduced pressure: the 5 um element protects the directional valve, the low-pressure regulator type suits circuits set well below standard ranges, and the check valve holds the setting if supply dips.
Point-of-use conditioning for small pneumatic actuators on lab equipment, where the 1/8 in port matches compact fittings and the psi-scaled square gauge makes set-points easy to read and record.
Filtered, regulated air for glue heads and small diverters on a packaging line, with the manual drain letting maintenance blow down the bowl during scheduled changeovers.
Step up through the 200 / 300 / 400 / 600 sizes until the port and flow curve match your demand - this 200 unit carries a 1/8 in NPT port, the smallest in the family. Choose the drain to match your maintenance routine: manual (this unit) for scheduled blow-down, automatic for unattended duty, or the differential-pressure default. The filter grade here is 5 um (code W); the standard element is 40 um if your valves tolerate coarser air. This is the low-pressure regulator type (code L); its exact adjustment range is not published, so confirm the set-point window with us before ordering. The embedded square gauge is scaled in psi, with MPa or bar scales and an external round gauge as alternatives. The thread on this code is NPT - PT is the standard and G is also available to order. No bracket is fitted; brackets are optional across the family. Because flow is published as curves, not a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for this series as curves, not as a single rated figure, so we do not quote a number here. Send us your line pressure, downstream demand and allowed pressure drop, and we will confirm the sizing from the datasheet on request.
The M in the code selects a manual drain: the bowl is emptied by hand at planned intervals, which suits attended cells. The W selects the finer 5 um element instead of the standard 40 um, a good match for directional valves and instruments. Both are catalogue options across the GFR family, alongside automatic and differential-pressure drains.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.