The AirTAC GFR200C06MLJF3T AirTAC Filter Regulator NPT1/8 Low-Pressure is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR200C06MLJF3T is an AirTAC GFR-series filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in a single compact body. This size 200 unit has a 1/8 in NPT port, a polycarbonate bowl with a manual drain, a 40 um standard filter element, and the low-pressure regulator type. A square pressure gauge with bar scale is fitted, and the unit is supplied without a mounting bracket.
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with ports from 1/8 in to 1 in, and can be ordered with manual, automatic or differential-pressure drains, a 5 um (W) element, PT, G or NPT threads, and with or without a gauge or bracket. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing. Flow is published as curves rather than a single rating, so ask us to confirm the datasheet figures for your application.
| Model | GFR200C06MLJF3T AirTAC Filter Regulator NPT1/8 Low-Pressure |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Feeding filtered, regulated low-pressure air to the pilot ports of directional valves and logic elements on a packaging or assembly line control panel, where the circuit runs at low regulated settings.
Providing clean, low-pressure regulated air to bench-top test rigs, sample handling fixtures and pneumatic laboratory apparatus where fine control at low settings matters more than high flow.
Supplying regulated low-pressure air to spray nozzles and air knives on coating, marking or printing lines whose process runs at low regulated settings and needs water and particulate stripped out first.
The real choices on this family are the size and port step, the drain type, the filter grade, the gauge and its scale, the thread, and the bracket. Step up from size 200 to 300, 400 or 600 when demand outgrows a 1/8 in port; ports run from 1/8 in to 1 in across the range. Drains: manual (as here, you bleed the bowl by hand), automatic, or differential-pressure. The standard element is 40 um; order the W variant for 5 um. Gauges are embedded square as standard with MPa, psi or bar scales, and an external round gauge is optional. Threads come as PT (the standard), G (BSPP) or NPT. Flow for this family is published as curves, not a single rating, so send us your flow and pressure requirements and we will confirm sizing against the datasheet before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves rather than a single rated figure, so we do not quote a number here. Send us your flow and pressure requirements and we will confirm the figures from the GFR200 datasheet before you order.
The L code makes this a low-pressure regulator, intended for circuits regulated at low settings; the exact adjustment window is not published in our data, so confirm it with us. The M code means the polycarbonate bowl drains manually - you bleed condensate by hand, which suits intermittent-duty installations where an automatic drain is not needed.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.