The AirTAC GFR200C06MLJF3WTK AirTAC Filter Regulator NPT1/8 is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200C06MLJF3WTK is a size 200 filter regulator: water and particulate filtration plus pressure regulation combined in a single body. This configuration is built for a 1/8 in NPT port, carries the fine 5 um filter element (code W) for cleaner downstream air, and uses a manual drain, so the bowl is emptied by opening the drain valve during routine checks. The regulator is the low-pressure type for circuits that run at reduced pressure, and the embedded square gauge reads in bar so setpoints can be watched at a glance. A reverse/check valve is fitted, and this version comes without a mounting bracket.
This is a genuine AirTAC part from the GFR series, which spans sizes 200, 300, 400 and 600 with port sizes from 1/8 in up to 1 in, and options including drain type, 40 um or 5 um filtration, gauge style and scale, PT, G or NPT threads, brackets and a reverse/check valve. Flow figures for this series are published as curves rather than a single rating, so ask us and we will confirm the datasheet figures for your application on request.
| Model | GFR200C06MLJF3WTK AirTAC Filter Regulator NPT1/8 |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Feeds filtered, regulated air to the sealing and clamp cylinders on a packaging line, with the 5 um element protecting the valve seats and the low-pressure regulator holding a gentle setpoint for delicate film-handling actuation.
Supplies the blow-off nozzles along a conveyor line, filtering carry-over water and pipe scale before the jets and regulating the supply down to the low circuit pressure the nozzles are set up for.
Conditions the air feeding a bench-top leak or actuation test rig, where the 5 um grade keeps the test circuit clean, the bar-scale gauge lets the operator read the setpoint directly, and the check valve holds the setting against backflow.
Start with the port step: size 200 with a 1/8 in NPT port suits compact circuits, while larger GFR sizes (300/400/600) step up to 3/8 in through 1 in for higher air demand - match the size to the flow your line needs. Choose the drain to suit attendance: manual drain (this unit) suits stations checked on a schedule, while automatic or differential-pressure drains suit unattended installations. Pick the element grade: 40 um is the standard protection level, and the 5 um element fitted here is the choice where finer cleanliness matters. Select the gauge scale (MPa, psi or bar - this unit reads bar) and the thread family: PT is the standard, with G (BSPP) and NPT as catalogue options to order. A bracket can be added for panel fixing; this version omits it.
One honest routing note: AirTAC publishes flow for this series as curves, not a single rated number, so before ordering send us your application details and we will confirm the sizing against the datasheet curves on request.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves rather than a single rated figure, so there is no one rated flow number we can honestly quote for this unit. Send us your application details - supply pressure, downstream demand and acceptable pressure drop - and we will confirm the sizing against the datasheet curves on request.
The M in the code selects a manual drain: accumulated condensate is emptied by opening the drain valve during scheduled checks, which suits stations that are attended regularly (automatic and differential-pressure drains are available on other codes for unattended installs). The L in the code marks the low-pressure regulator type, intended for circuits that operate at reduced pressure; the exact adjustment range for this variant is not published in our sheet, so ask us and we will confirm it on request.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.