The AirTAC GFR200C06MLJNT AirTAC Filter Regulator NPT1/8 Low-Pressure is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200C06MLJNT is a filter regulator: one body that removes water and particulate from compressed air and regulates the pressure delivered downstream. This 200-size unit is built with a 1/8 in NPT port, a 40 um filter element, a manual drain and a metal bowl. It is the low-pressure regulator type, and this code carries no gauge and no mounting bracket.
This is a genuine AirTAC part from the GFR series, which spans sizes 200 to 600 with ports from 1/8 to 1 in and PT, G or NPT thread options. Automatic and differential-pressure drains, a 5 um element (code W), gauges and brackets are available on other codes in the range. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing. Flow is published as curves rather than a single rating, so ask us to confirm figures from the datasheet for your application.
| Model | GFR200C06MLJNT AirTAC Filter Regulator NPT1/8 Low-Pressure |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Supplying filtered, regulated low-pressure air to the positioner and pilot circuit of a pneumatic control valve on a process line, where clean air and a steady reduced pressure matter more than volume.
Feeding bench-scale pneumatic test rigs and pilot-plant panels that run at reduced pressure, where a 1/8 in port, 40 um filtration and a manual drain suit intermittent, supervised operation.
Regulating supply air to compact grippers and small cylinders on a light-assembly cell, holding actuation pressure at the low settings these devices are set to.
The decodable choices on this code are the 200 size with its 1/8 in NPT port, the low-pressure regulator type, the 40 um standard element, the manual drain, the metal bowl, and the absence of gauge and bracket (both can be specified on other codes). Step up through the 300, 400 and 600 sizes where a larger port suits the flow your line needs. Choose a manual drain where someone drains the bowl as part of routine checks, or specify an automatic or differential-pressure drain code where the unit should look after itself. Thread is NPT here; PT is the standard and G (BSPP) is an order option. As a low-pressure type, its adjustment range differs from the standard GFR range, so we confirm the exact setting range from the datasheet. Because AirTAC publishes flow as curves rather than a single rated figure, send us your flow and pressure requirements and we will confirm sizing against the datasheet before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes GFR flow as curves rather than a single rated number, so we do not quote a figure here. Send us your flow and pressure conditions and we will confirm the sizing from the datasheet on request.
This code ends in N, so no gauge is fitted. GFR units with a regulator can be ordered with an embedded square gauge or an external round gauge in MPa, psi or bar scales on other codes; we can confirm the matching gauge variant for this size on request.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.